Search results

Just variances between hoods and the rubber looks a bit old. Just trim it a bit and down the road you go. Mark

Are you saying you don't have a rear bracket for the starter. That is a buttload of weight to be cantilevered out supported only by two starter bolts. Like I just read about the Space X test vehicle's explosion today. Rapid unscheduled disassembly What a great line that it. Mark

Replace it and when you have it out try to blow through it. I'm sure it needs to be changed anyway and you can cross it off the list. Mark

Yeah no lock wahers. The problem is the bolts are not very thick and the starter is very heavy. Just the way it is. Mark

Was just thinking the same thing. Truck sat and then started to be used and garbage from the tank makes a mess of things. Mark

Well you need to start doing some detective work. Pull the dist cap and check the points if good lube the shaft and set the points for .018". Next disconnect one of the spark plug wires and with a spare plug see it you are getting a hot spark (running) so you know the coil is ok. How long has...

On my M998 I was able to walk it around with a good sharp punch. These bolts typically fail not because the get rusted in place but because the base of the bolt work hardens from the weight of the starter and the torque of the starter. Replace both for sure and make sure the rear bracket is...

Carb needs to be rebuilt is a very likely cause for the problem if it has been sitting. I had a 51 M42 and went down the same road. Mark

I dug mine out and depending on which cylinder it is it back be a bear to get in there. I used a cotton ball I stuffed into the injector hole then pushed it under the broken tip. When I tapped the tip in from the outside the cotton captured it. I then used a custom bent long needle nose pliers...

Very creative to say the least. Well done Sir. The woke hates everthing that doesn't follow their narrative or offends them in some bizarre way. Keep us updated. Mark

And you will need to thin out the paint. Mark

Dispute the charge on your credit card. Some companies are nothing but thieves. Mark

If you are using the old shaft make sure you mark the drive shaft to pinion so it goes back on with the same orientation. If the drive shaft is out of phase (180 degrees) it can cause a vibration. Have seen this problem with a Nissan frontier truck just a month ago. Mark

Very interested in the outcome as I am at a loss where those pieces came from. I would just be giving wild guesses. Mark

My X-wife's super power was the ability to find fault in me. Kind of a suck super power if you ask me. Mark

But but won't it also give us super powers?

What is this "air conditioning" you speak of ? Lol Mark

Old? The Humvees are not old. They are just mature that's all lol. I drove many cars with powerglide 2 speeds back in the day and we got around just fine. Mark

Only issue with all black is you have zero contrast with black on black on black. Makes the truck look less finished IMHO but still nice. Keep up updated. Mark

Below is the unit you want. Mark