Search results

That is a good idea to check! If it is pushed in the dash light should be on.

You need to check to see if any of the spring brakes are caged and get the spring brakes (parking brakes) working before you drive your truck again. The brakes (spring brakes) should come on when you get low on air, like below 60 psi.

Have you checked the brake shoes, adjusted the brakes? Does the parking brake hold the truck? Sounds like some of the service brakes are not working.

99nouns Yes just run a new wire and route it the best way you can. I think there is a pass though on the fire wall close to the black box. That is were I run into the cab.

I had a erratic oil gauge and it trued out to be the wire coming from the sending unit to the gauge. I just replaced that wire and all good now.

About three summers ago we had a summer storm come though and it took down 27 poles along the road that feeds our house. We were down about 7 hours.

You need the MEP-805b back, LOL

Glad you had the Gen. Always good to have back up power.

Nice job!!

Hello, The owner is Castle Bravo on here.

I like the one "driven on to lot".

The service front has to vent when you release the brakes, that is why it has a little vent on it like the ones on the axles. When I got my first 5 ton truck I was new to 5 tons, the truck was just out of rebuild and someone had put a shut off on the front service. One day I was washing the...

I would say you may have a hose clamp that may need tightened up. Also welcome to the site.

Thanks! that is good to know you can use that type of hose.

Nice!! Thanks

FYI, I would not replace the one on the front service if you have one there. If it gets closed your brakes will slowly lock up. Don't ask how I know that.

Ok, Let us know how it does.

Nice video thanks! I do have a question about the output hose on the compressor, is it going to be able to take the heat form the compressor? I know on my trucks the copper output line gets very hot when the compressor is running.

Have a safe trip!!

I think you just have to replace them. I have seen a lot of them that leak. Just try to keep good seals on the glad hand and that will help.