Search results

I have had good luck with the Raptor bed liner and you can tint it to the color you need or just use the black. https://www.amazon.com/U-Pol-Products-0825-RAPTOR-Black/dp/B00NOIKSPC...

You do not have to remove the steering box to get the injection pump off.

Nice Truck and lots of BII to go with it!! Wreckers are cool and useful. I have used mine a number of times, pulled a motor from a truck, put my S280 shelter in and out of my M923A1. But it is heavy, be safe and have fun!!!

You can get the U-Pol Raptor that is tintable, then had a car paint supply house mix up some tint for you. I did that on a Deuce I did. I sprayed it on the cab floor and the bed floor. Worked and Looked great.

You can get the little Schrader valve at most auto parts stores.

Is air leaking out the bottom of the air dryer? If so just push up on the center of that is in side and it should stop.

I think I would replace the Alt., I'm thinking the shift will brake off in time.

You are never done them them, always something to do to them.

I used the Rust-Oleum® high temp primer and paint, in black, it was rated for 2000 degree. It has held up well. http://www.rustoleum.com/product-catalog/consumer-brands/auto/primers/high-heat-primer/ http://www.rustoleum.com/product-catalog/consumer-brands/auto/specialty-paints/high-heat

:ditto: It is not that hard, you just have to be safe about it. I get my diaphragms from Napa also. Service side is a T12 and spring brake side is a T16.

When your lifting the bed can you see that the latch is pulled back? The latch should be pulled back anytime your lifting the bed. If it is not I would say the Hyd. cylinder my not be working. For safety be sure to put the bed stops up to hold the bed if you start to work on the Hyd...

I had a M934 and it drove nice, the ride was great due to the long wheel base and the weight of the truck. I think it was around 30,000 lbs. The problem was putting the sides out, it was a pain by your self or just with two people. To make a camper out of it all the mounted things inside had to...

I used the Raptor bed liner on my two M35A2. You can get it untinted and have some tint mixed up to match or get the black. Clean it up, prime it and spray the bed liner. Be sure to clover what you do not want it on. :D In FL I would keep the mate out. On my M925 I had to replace the floor due...

Maybe a shorty wrench or a crows foot.

Not much mud here in AZ, just sand and dust. LOL

This one needs to be UP for High. In the pic it is down in low.

Pull up the big lever that is a little under the seat, if you have a winch you maybe moving the PTO lever. It should come all the way up to the seat.

Sorry to hear about your hand!! Sometime we do things we should not and get away with it and sometime we do not. Hope you get better soon!!.

I use a brass drift also.

Here is a light kit from Eirk's http://www.eriksmilitarysurplus.com/liplli1.html