Search results

I’ve been looking for an OEM style that would match that steering wheel but with leather. Anyone come across such a thing?

Nice job! Thanks for sharing.

So yesterday didn’t go very well. The paint data sheet recommends airless sprayer or brush. The owner of the paint store said I can spray it using HVLP spray gun with a 1.8-2.2 tip or airless. The professional auto body guy that sprayed the exterior of the truck did a small test spray a couple...

Absolutely a patriot!

All ready.

Yes it is!

Pulled the vent line off and it’s clear. Cleaned the remaining gear oil out of it. I’m unable to check the CTIS theory currently because I have it parked in an air conditioned shop prepping it for painting the interior of the habitat. I’ll have to check that on Sunday when I pull it out of the shop.

Very Interesting thought. I’ll definitely do that.

I completely agree with you but no kink and the vent has that little metal cap on it preventing critters from getting into it. But I’m going to have to pull it all apart and check everything.

I have a 2003 M1078. Purchased it September 2015 it had ALL the drain plugs remove and no fluids. Properly filled everything 6 years ago. I’ve driven it 5,000 miles in the past 6 years the longest trip was 3 hours of straight driving. Yesterday I drive it 15 miles and when I parked it there was...

A friend just sent me this source.

Preparing to paint the interior of the habitat! Going to be challenging because with the interior walls and painting the door jams requires the door to be open means Everything has to be taped off. I’m doing inside the shop that is climate controlled helps tremendously But now the lighting is...

Yeah, anybody figure out the 12 volt parasite?

Jump Starting the FMTV! Yesterday I attempted to start my truck and the batteries are dead again, understandable they are 6 year old batteries. A quick trip to Sam’s club 4 new group 31C batteries and one of those small jumpstart boxes only 3.5”x1.5”x8” 12vdc. On the way home I thought maybe I...

The shower pan and toilet cover is stainless the walls are aluminum.

Maybe a Bad connection to the solenoid somewhere.

Thanks guys, I’ll try and keep it up to date.

3/16” rivets and 3M adhesive.

Almost got everyone caught up to what I’m currently working on. Started fabricating the walls. Lots going on in the bathroom walls electrical, sink plumbing next to the toilet, and shower plumbing.

Better view if the steps and back porch. Sprayed color near the floor and where I’ll be putting the walls and shower pan prior to permanently installing them.fabricating the shower pan and toilet cover. After grinding and polishing all the welds. Test fitting the drain ring. Installed the...