Search results

What Is “IFS” and what does the IFS kit do?

About 10 hours of hand stitching use wax coated lacing string.

I have a 2003 A1 and I have experienced a ABS light. I had just changed out the axle gears and in doing so I accidentally bumped one of the sensors in the front axle out of range. It was a simple fix, just follow the sensor wires and push the sensor back in so it’s back in the proper position...

Nice work!

.080” aluminum sheet

The overhead console I made was a one off build, with very little documentation. But I started with making a template out of card board the transferring it to aluminum sheet then about 50 small adjustments, cuts and test fits before final welding. The doors are made of 1/2” Star Board, cut and...

The one I used is a continuous loop, so the stroke is infinite. Mine goes all the way up and down.

Biltek 2x Door Car Power Window + Keyless Door Unlock Kit For Ford F-350 F450 F-550 Super Duty Fiesta Flex Focus This is what I ordered from the amazing......online store. $83 like I said earlier use a better quality wire and connectors than they supply you with. They are still working as good...

This kit that I used came with a back up crank. Just pop off the cover where the old crank was and put the back up handle on that I keep in the overhead console. Just run wiring across the front along with all the other wires. The area that has the most room is just in front of the heater/AC unit.

The seats were purchased from the online auction site and they are dodge caravan second row bucket seats with arm rests. I’m guessing they are take outs from when they do the van conversion for handicap vans. I made the boxes out of 3/4” Star Board. I made the liners using the material from...

Here are some pictures of the lock and window install. My biggest tip is do not use the wire that they supplied you with and use good quality wire.

It's been a while since I've updated everyone on my project. So I'll try and get everyone up to speed. 8 months ago I brought the interior up to date and Installed power windows, power door locks, RFID keyless start, backup camera, touch screen stereo, 2" of sound proofing and heat insulation...

Here are some pictures of the almost finished interior.

I purchased all the insulation and floor mat material from www.cabinsulation.com Check them out. The floor mat material matched the original LMTV floor mat material. I’m guessing they may be the supplier to LMTV manufacture. All the insulation is soft foam. Using the metalized mylar first again...

My latest update involved replacing the Gen1 dash/evaporator unitwith the newer Gen2 unit. After trying everything possible to get it to blow colder air. The gen1 unit struggled to blow 60-65 degrees on a hot summer day here in Florida. Which doesn’t cut it. So in goes the Gen2 unit. Now it...