Search results

Eng oil cooler is on left side..trans cooler on right side of cooler assy......temp bypass ok for oil side...trans side should not be bypassed .

Here's how they go....

If you have the big spring and tilt adapt....there is another rubber part to that.

14 v tap is on 200 or 400 amp alt. regulator. The wire runs to the rear battery +.

As cam says...It probably goes to the left side of the trans.

Yep...direct

Supplemental doors range from 3500 to 6500.....which the 6500 ones are to much $. One real up armored door weighs more than 4 supplemental doors.

That green lable box is one of the worst ones out there....and it does not use the GPC in the crossover. It also is Not a smart box. Nartron and KDS white label green colored box with 3rd connector is a smart start box,,,,you can find them, but if you do, you need a TSU instaed of a GPC In the...

Those brake switches get a bad spot inside or go bad....try unhooking it from lever and cycling switch, and readjust location a little. If bad , I have replacements.

There are 2 types...one for steel, and one for aluminum hatch.....aluminum one has a bigger gap.

There are 2 types of hatch seals....one for steel hatch, and one for aluminum hatch.

The relay for the 4l80e trans behind battery box will sometimes stick closed with voltage going to your trans computer with vehicle turned off.

Thats a real one.

Chinese junk.

35 use with 3 spd truck 36 used with 4 spd truck with 242 T/C 41 for Rev truck

The clutch is built into the pully.....if it fails or quits as a clutch....it will be like a standard pully without a clutch.

I'll get it off shelf.

Yes

First pic with fat wires are for turret system .

The early series Serp system has a bracket for 100 and 200 dual volt....100 is different when you put one next to a 200. Late Serp on used a 200 or 400.