Search results

lee, again thank you!!!! I am going to need to buy you dinner!!! I feel so dumb sometime. That did get the field to working and the generator started showing voltage and Hz. Also ran a drill motor out of the 110v outlet. But I do have one more question, Should the generator automatically come...

Lee, thank you for all your help with the motor. Yes I did have to turn the motor over 360 to get the dots lined up. I do need to start a thead on the problem. I did not know about flashing the field, what is that? Here is the new link on the problem...

I got my Mep-005a motor running after getting the pump rebuilt. But now the generator side is not working. The gages on the panel show no voltage or Hz. Is there something I need to do to get the generator to start working?

Well I got the IP pump and the injectors installed. Got the motor timed and lines put on and tried to start it. It took just about 10 sec. and she fired right up, a little smoke at first then none at all. Let it run a little to warm up then I run it up to speed, runs very well. But the...

That sucks for sure!!!

There is a little filter on the bottom of the pump on a m936 and on the top a std. m939. It is about 3/4" dia. Fig. 96 in the parts TM.ARMY TM 9-2320-272-24P-1

:beer: I will give it a try this weekend and let you know how it works. I still have to put the injectors in it. Thank you!!!!

Lee, s I guess my question is when the motor turns over 1 time does the pump turn over 1 time also. Or is it geared so it's 2 to 1 or more. I will not be able to get back to it till Saturday. Thanks for all your help, I need it.

Lee, Thanks. I did not know about the dots when I took it apart so I do not check. I have just put the pump on with no line or fuel lines. If the motor is at 20 degrees and I turn it over again that would be 360 digress right? I'm thinking out loud. So when the flywheel turn 360 the pump...

Lee, I got my pump back from repair and it lined OK with the shaft like I left it. Twenty degrees on the motor and the two lines on the pump all line up. But the guy at the pump shop said to make sure the two dots, one on the shaft end and one inside the pump line up. I looked and my dots are...

I pickup a M101A3 last week and it went well. You can only pickup on Thursdays from 7:30-2:00 and no forklift. You can tow them out. Just call GL today and set it up. The gate is easy to deal with just have you paper work, Id's, etc. Just do not be in a rush only one GL guy and a lot of people...

Castle Bravo here on SS has a M916 with a 7 speed and it has air bags under the cab. I do not know the top speed, but I know it will do 65mph plus and 60mph plus towing a M923A1. Look up some of his post.

Carnac, thanks you!

Carnac, Hi, I have one more for you to lookup if you would for me. Thanks!!!! It is a M934 AM General Truck Van, Expansible a. C53400062 b. NL0BWW c. 2320010478754 d. Nellis AFB, NV e. Can not read them Contract # DAAE0781C5597

It is a M934A0.

Sure I will do that for sure when I get it. Yes it is coming for the government with the A/C installed. I will picking it up on Feb. 5th.

I just won a M934 that a A/C system installed in it. If you want I can take some pics when I get the truck in a week.

When I did my seals I used my side hammer and they did not move with it. I guess I needed a bigger hammer.

Way to go, have any pics of your new slide hammer?[thumbzup][thumbzup][thumbzup]

I would drive it out from the other side. That is what I had to do on my M936.