Search results

But they just got a new batch of tracks made.:wink: With all the CNC stuff and 3D printers , new comsumable parts are right around the coner. There's a guy on here restoring a M151 that is repoping boady panels now. New part for alot of stuff may get easyer to find in the future.

Its easy to look in from the side to see in the igniter is working or not. Its a "U" shape wire that glows white hot. You can also hold down the start button to over ride, to try to get the air out.

Just won a M129A2A from Ft Riley KS. Need it moved to NW Arkansas or close to. Or if you need a running 5 ton trator moved this way...Lets talk.

I've got a bunch of those out in the shed:wink:

I had a 12.50r20XL blow out about a 1sq foot chunk of side wall doing 55!

Question , do you have to "own" a mv or can you use one that you had control/possesion/signed for?????:whistle:

Vote for me I'm running out of truck's to put up here:(

Get the 1" impact and a 1/2" hose from HF. It will take the nuts off fast enought that you will have enought air. I take my with on trips but not every day runs to sonic.

I powered washed the moss off my M109A3 and changed the oil and filters. Use Dlevac with the rebate:D. Need to finish the greasing and change the oil in the trans.

Nice work on the paint job. Too much black for me, some one else too day showed one with sand ,tan and brown that looked good. But that's just me. I do like the work thought.:goodjob:

Keep the number's coming , there's hope for my trucks after all.

There is a place close to me that has a M923 with paint ball guns down the side of it.

OK, I'll "try" again but against a HT I don't stand a chance. So hear is my M36A2w/w.

A VFD I was on had a '80's L9000 Ford with the 250 in it.

I was just at the Bunker, its just down the road from the D-day park. I can't wait for Oct.:x

I had a 12.50R20 blow out at 55 on the right front. I too had no problem controlling the truck and pulling it over and stopping it. The tire well what was left of the tire, was wadded up around the rim.

Cool hope to see you there.

Looks like the MS3106E1611S or P. The 11 is for 2 pin 12ga. The numbers after the 16 is for the pin number and arangment.

OK they are made by ITT web site www.ittcannon.com . The part number for an end to plug into the MBU is CA (or) MS 3106 (for a straight plug) or 3108 ( for an 90) E16SF80. MS3106E16SF80 would get the straight plug. If you look on the web site look for MIL-DTL 5015 selection guide. Each letter...

How do you center the wheel on the hub?? Hub piloted hubs, have tabs that center the wheels , 5 tons hubs don't. Just asking.