Search results

I have boxes and cables. Racal and Bose and other headsets with the same bailout plug will work. Ill get pics tuesday.

I'm the one with the Vic3 F/S....its got different connections. I saw the Tocnet on Flebay and did not bid due to no wiring available. I have about 6 + of those tocnet boxes used...can't test them.

Number under thick paint on A beam is body number, not serial number.

Here's a 6 k relay box opened....circuit card imbeded in the middle. It goes bad and winch wont work. Warn told me take it out of the loop.....so I did , and winch works. Sometimes a solenoid fails. Wires circled in red....unplug it, cut plug off, attach a lug to lite green wire. Wire circled...

MacMotors has um...pn 12469493

Check the balancer on the crank pulley area.

As pictured...$ 200 plus shipping. If interested...can't ship until next week.

Max tool kit .

I've seen alot and never seen that one.

A new fan.

I have a few nos surplus pumps available. Q.D's also for the fan disconnect.

There's one on that auction site....its been there for awile. hmmwv turret its on first page.

Wheres the fan clutch ?

I have a plate with a Max tool kit available. I'll get a pic.

No thread. These are thicker rails, and galvanized. I took apart a few and seen no cracks. One weak area is between the 2 ears of the front upper A arm on lift tower. Later towers added metal up top and filled in lower area which when bolted in, adds strength on rail.

Building my 12 k frame . Got it painted yesterday.

I've had 3 different brands [ used ] LED's and found some of them did not fully work. The early truck-lite's that have all wires numbers with white decals mostly did not work. The later ones with colored wire number decals worked fine. 90+ % of Grote and Riverside brand worked fine. All are...

It will work on a 4L80E with the proper adapter. Adapter on the 3L80 won't work on a 4L80E.

Your 242 is dated 06, so its probably the good one. There are two different 242's that can go behind the 3L80 trans....one has a 3 bolt tail shaft, one has 4 bolts. 3 bolt one has a smaller slip yoke. I've had 3 and 4 bolt T/c's with the blue band on one tube. The 4 bolt tail shaft T/C is also...

H217 code = August 21st. 1997 if its a 6.5 engine.