Search results

My 12k build Starting a build...12K frame. Added alot of missing parts so far.

Safer to do negative first

Here is the bracket...old style on the left, new style [ thicker ] on right

erasedhammer.....which ever way you go, you still need to change at least 2 driveshafts [ middle and rear ] and rear diff. yoke. Trans X member also.

Correct

I put 16" trailer rims and trailer tires for pulling behind a 3500 Ram. Leveled out fine, and tires are available anywhere., If using it with the Hmmwv, then swap out the tire/wheels. Trailer rims have a big center hole to fit the trailer hub. Cucv wheels dont fit due to center hole to small.

12K frames also have different X members .[ all 4 ]. And different diff. brackets...[ all 10 ]. Might be a clearance issue with the bigger rotors and the X members.

Its not in stock at a dealer, but if it was....$ 793.00

Might have been a civi W/S frame . They had some metal extensions to match a civi top.

If they had no air....they would look half flat. That would be very noticeable , so maybe they were good most of the trip.

I'll get a pic sunday

The labor to fix the stud if fixable and then to freshin up the starter would probably be more than a surplus new starter. As rusty as it looks....the rest of it may be pretty corroded. Starter has another mounting stud which goes in a bracket at the motor mount......they get loose in bracket...

The milemarker winch controller is yellow and has two push buttons. The controllers from Warn are black and are wired different....just switch wires around.

Welcome . If you need anything or parts...I'm 1 1/2 hrs from you.

OK....got to order more tomorrow.

You don't want those parts....send them to Me.....

Put a wanted add for a -5043 so these guys that watch these posts won't get this post cancelled. I'll answer there.

It is somewhat complicated......there 3 T/C's used on the early trucks. What T/C do you have ? NP218, or NP242 early one [ with 3 bolt tail cone ], or later NP242 with [ 4 bolt tail cone ]. Mid shaft -3096 only used with NP218,....-5043 used with both NP242's. I have them available also.

I have nos surplus ones available.