• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. doghead

    Thanks Everyone

    I actually have a Masters Degree in Chinese Mathematics... And a BS in forum moderation.
  2. doghead

    An new M105A2 here

    Please do not start or post in multiple threads on your trailer like you have. You end up with questions that do not need to be asked because they are already in your other posts/threads. We call this cross posting and it's against the site rules for a few reasons.
  3. doghead

    Stewart and Stevenson M1088 Suddenly No Power after Master Switch

    Great, please enter your location in your profile.
  4. doghead

    My New Toy... HMMWV

    Your rims are not rated for radial tires, so consider that if you choose to go to modern radial tires.
  5. doghead

    Castle nut size

    16 tpi, threads per inch.
  6. doghead

    Cummins Parts Dealer

    https://www.merriam-webster.com/dictionary/curmudgeon?pronunciation&lang=en_us&dir=c&file=curmud01
  7. doghead

    Castle nut size

    Found this with a search for "castle nut size"(your thread title) It took less than 1 minute to find. https://www.steelsoldiers.com/showthread.php?78752-M200A1-lunette-nut-size Please try to search before posting a new thread.
  8. doghead

    M1028 charging problem

    I can't think of anything that could cause it elsewhere on the vehicle.
  9. doghead

    M105 Trailer wiring & build 24v to 12v 4 or 7 pin connection

    I think it's called a 7 pin or pole RV plug. I was confused. Thanks for the reply.
  10. doghead

    M1028 charging problem

    I don't know. Return it and request it tested?
  11. doghead

    Cummins Parts Dealer

    One of the never ending thankless tasks we moderators have is, helping members use the site correctly and to get the best results. Your first and second posts are contradictory. If you wanted a vendor source only, you should have said so first off and posted in the vendor quote forum. (I...
  12. doghead

    M1028 charging problem

    Never seen this before. Perhaps a voltage regulator could cause this, maybe? What brand of alternators are these? What part number?
  13. doghead

    M1028 charging problem

    Which side alternator is your problem? Where are your leads when you measure 55 volts? Is your meter set on DC voltage?
  14. doghead

    Jump Starting MEP803A

    He meant, to start it(with no battery tied to the alternator of an engine driven alternator). Reference, post # 7.
  15. doghead

    Stewart and Stevenson M1088 Suddenly No Power after Master Switch

    What state ? The rules request your state in your location.
  16. doghead

    Stewart and Stevenson M1088 Suddenly No Power after Master Switch

    Are you broke down on the road?
  17. doghead

    M35A2 Bird House??

    Nearly every year, I find a few robins have nested in, on or under one or more of my trucks. They also nest in the fuel can brackets on some other stuff around the yard. Once, I needed a truck that had a nest on the rear tire. I carefully moved it to the truck beside it and taped it to the...
  18. doghead

    M105 Trailer wiring & build 24v to 12v 4 or 7 pin connection

    I posted bulb numbers in the other thread you cross posted into. You'll need to test the wires to figure them out. I do not believe there is a color coded chart for trailer wiring. Why are you using a 7 flat plug(never heard of one)?
  19. doghead

    M105 lowered.

    Please do not cross post . A forum search should find the bulb numbers (about 500 threads have discussed this. 1156 and 97 come to mind, iirc.
  20. doghead

    Best way to test the ether system?

    You can do it while it's running, and you'll notice the engine rev if it works. Or, you can disconnect the tube and watch/see/smell it, without it running.
Top