Search results

searched but really didn't find much. I have an M35A2 and I need to do a couple things behind/under the dash. I got replacement heater hose sections to replace the rotten hose thats in it now. The 4in sections are easy to reach, but the 3in sections going to defroster vents are not. Also the...

Got old rubber items replaced (hoses, fan belts, wheel seals, etc) just in time for Winter Field Day 2024, an amateur radio activity.

Older thread but closest to my question and there is great info in this thread. It has been below zero in my area last few weeks, and I was curious about its ability to start in these cold temperatures. Good news is that it does start after a small handful of tries, like 7-10, which I think is...

For anyone interested in the parts list, which of course was specific to my truck but could be useful for an idea of what may go into a 'full' rebuild, I itemized it here: Cost of Dodge M37 rear main oil seal repair (by rebuilding everything) – Stickelman.net I will post pictures when I get...

This was my experience, but for someone wondering what it might cost to rebuild an M37, I can share what I ended up spending. Overall, it was just under $20k ish This was full engine rebuild, done by NAPA in (North) Topeka. Transmission rebuild done by Smith Brothers transmission in Topeka...

I have 395s and do not have full swing on right hand turns. You also cannot keep spare in the spare rack since it wont fit there. Not show stoppers, but factors for consideration. My thoughts - If you want a truck that is "as issued" then naturally you would have to keep the multifuel. I am...

I had a shop in my region (B&D Radiator in McLouth, KS) do an M37 radiator for well under $1000. This was less expensive than a replacement and he did a beautiful job of it. Whatever Depot last touched it went nuts with solder and he cleaned all that up and recored it. I dont know if I am...

More like 10' :v

That is really bad news. I got a PRC-9 from them not too long ago. They were super helpful. I have been looking at their stock and have been planning to get some stuff, dunno if ill have time to gather enough spare cash to swing it. I may have to take a road trip there and see what I can manage.

Got the M185 bumper numbers painted and let it frolic with other tactical vehicles in its natural habitat M109/M185 windows are a pain. There are wood slats holding the window frames together and mine were rotted out, leaving the double pane glass flopping around. Found a window guy with the...

When buying fuel at a truck stop, and it asks for tractor or reefer (heh) fuel, use "Tractor". For someone who is in an agriculture area, generally tractor (an agriculture tractor) fuel is red dyed and is less expensive since they dont tax it for road use. At a truck stop, a tractor means the...

A forum about the M35 is likely the wrong place to ask, but why isn't a light oil not used as coolant in internal combustion engines (ICE) in general? I couldn't find an answer other than a non conclusive discussion on bobs the oil guy and a silly video where a couple of amusing knuckleheads...

Question of current state of fuel and additives - when I was on active duty, diesel was very oily, diesel I am getting at pump recently seems to evaporate much quicker and isn't as 'oily'. It seems more gasonlie like, other than its a pain to fill a tank since it froths kinda like beer just...

Thank you very much for digging that up, I must have missed it. Copper washer seems to work, it is dry after a highway run. I really appreciate your suggestion. I was worried about the gap added with the washer, but it seems to have no negative effect on performance.

Bummer, it didn't hold, it is leaking after driving it a bit, much slower but leaking. I didn't see a torque anywhere, I did 50lbs since I am worried about breaking it. I assume teflon tape or something wouldn't help in this high pressure area?

With a helpful tip from Big Mike, who recommended foot powder on a clean part, I was able to isolate a slow fuel leak to the hydraulic head top center fastener (not sure what to call this) - the one in the center of the fuel lines as they leave the hydraulic head towards the cylinders. Mine has...

Yes, this is what I am hoping to focus on, specific guidance for a person new to the M35a2 wanting to drive their truck in the best possible way, specifically minimizing damage done and improving longevity. This is what I am finding works best for my skill level and truck - I feel much better...

Thank you for opting to join in, its good to have the perspective of someone that is familiar with the guts of these machines. I most certainly am not.

I initially learned to drive a manual by being stuck doing it. I arrived at a new duty station, was invited to the local bars the people in my new unit, and not wanting to get liquored up in a new place, opted to pass on drinking. Everyone else did get liquored up and when it came time to go...

Yep that was silly of me: Circled in red, looks like an add on by a unit rather than something from the factory. It appears to do nothing. The blue light is also inoperative and Im inclined to remove it but its bolted on so ill need a cap or something for the holes left behind. Ill trace...