Search results

In the parts manual, it shows A1's to have front high back seats.

The outer is hardened, inner is soft steel.

Windshield bezels are M1025/6 series...thin glass. Has the screws in rocker panels holding the internal thin armor plates.

I have a Mount and matching unit with wiring for that system. Going to Lodi next week.

Same part.

1982 ? No such Hmmwv. That fuel panel is not factory. Somebody in a factory might of did it. Most rivnuts in the hmmwv are steel. If installing new ones....after holes drilled, apply sealant around rivnut, put in hole then squeeze it in.

I have new ones for $ 50

Harness if found are around $ 1500 or more. You'll need a trans X member, drive shafts, shifter, trans / T/C lock lights, New differential yokes.

I have some spare metal I can trace a panel onto. I also have late style sending units.

Red gear will have a 36 on it Orange gear is for 2.56 ratio.

I have a demilled BFT screen that I took apart and added a police 12.1" lcd monitor to. I'm going to do another soon, and will sell one. In F/S section

On a motor from the past.....it leaked in the valley under the pump....was the plunger o-ring. I have lots a new -3 valves available, and maybe a new 4879 pump.

They used to do it to CUCV's with a spring loaded switch, ,.......count to 9 and let go, then start it.

Power cable, radio to vic cables, and long intercom box to box cables.

Can't use milemarker stuff with 6 or 9k stuff. 6k and 9k mounts are plenty strong enough for even a heavier truck. Those 6 and 9k warn winches will handle more than they say.

Pic links don't work. Sounds like you have a 6 k winch plate, which uses two brackets. The 9K plate has a big square hole, and uses 4 brackets. 9k, and 6K warn winches have a different bolt pattern. I have most of the brackets for both.

I have lots a new ones available.

6.5 de-tuned and 6.2 use the same water pump.[ V velt trucks ]. 6.5 Serpentine belt motors have a different water pump and pump plate.

That one at eriks is for a late 6.5 with serpentine belt. Eriks also lists a 5740079 which is for a V belt motor. Also search 5740079 on web. Pump used on civi H1's 92 to early 94 with 6.2

Green is a M101A2 bed...fenders don't stick out far enough to be a A3. Bed in crate is probably a 105.