Search results

I have purchased a set. I will need to make hinges. I will need to reenforce the sheet Aluminum. I have an old Aluminum sign so I will see if the gauge is thick enough. I’ll use angle iron for the hinges. I will probably make a dummy to see if it works prior to cutting into the HMMWV. Do...

Wouldn’t overcharging be due to pulley size and not offset and a bad regulator? Looks like you ground down the bracket. Am I correct? Nice ingenuity.

$720!!! And we need 2! Walmart is looking better and better.

Cheap price club batteries is the way I went.

I’m not sure if it’s the photography, but it looks like somethings wrong with the alternator itself. Is that spinning assembly itself shaking? Does it turn freely? Either that or you beat the shit out of it with a crowbar, which may damage the function of the stator, and may damage the function...

Only use DOT 5 in the brake fluid (not 3, 4, or 5.1) Only use Dextran III/IV/V/VI in the tranny and power steering and Xfer case Never work on the electrics without disconnecting the batteries.

You will see a few of us call that “the little green smoke escaped” or “you let the green smoke out”. We’re describing a blown unit. Always ground yourself when working on components with delicate electrics. Just tie a stripped wire to a radiator and tie the other end to your wrist.

Perhaps crack open a McMaster catalog. I have a friend on the Hummer Network website who does that and he seems to be able to pull rabbits out of hats. I’m not saying bearings and such will be there BUT it might be worth a shot. Re.: coils and stators… my dad was a PE who designed and built...

Good luck with that. Does not appear any non OEM are manufactured yet. Have you thought about getting your unit re-cored?

I love it, but I still need all the mounting hardware. That is just the door without the stuff to attach to the fender… That’s why I need to purchase with pieces of the fender.

I am looking to customize my HMMWV vehicles. When driving on a hot day, there is not enough ventilation. In my old BJ 44 Toyota, there were kick panels that would open up so when driving on the open road air was forced in by the feet and ventilated the vehicle beautifully on a hot day. I have...

This happened to me when a hose burst. You need to remember how do emergency driving eslurf. I had no difficulty because I remembered to keep the vehicle rolling to make turning the wheels easier, and to upshift and downshift the transmission to assist with braking. I had minimal issues and...

Perhaps time to upgrade to a 200 amp dual voltage alternator???

Rubber duck has them… $475!

Ok. I’ll keep looking

I have not read the entire thread, however Hummer parts guy seems to have this thing covered. (Personally I prefer knowing that I have Runflats to keep me safe.)

It literally warms my heart that you and others have used this posted thread to manufacture your very own bullet proof PCB. You’re using the thread exactly as intended! :giggle: For all future visitors, post#51 has the clear schematics that will allow you to bypass the PCB/EESS forever.

So far my research shows the following…

A year ago RWH suggested Sherpa winches and custom mount plates (Black Dog Customs). I’m not sure if the following is the correct plate

I believe there are special 3M grinders that remove cement but leave paint relatively intact. Our paint and restoration forum should have some people there who can tell you more.