Search results

they were noted to hunt when in OD if you are driving a round town with it in OD with the 3:08 gears thats bad even on the highway with that gearing not much better, best to keep it in drive and get a B&M Trans Temp Gage and a very large trans cooler the stock ones not worth a dam, heat kills...

OK heres what you need for setting the RPM's with the STE-ICE you need the DCA Cable that goes from the plug under the dash to the VTM, set it too the #10 on the VTM, start the vehicle push the test button on the VTM and if everything is working correctly you will get your RPM reading its...

K would be correct, its used for tactical vehicles how they came up with that is anyones guess, there were 2 MKT field kitchens at the Red Ball Rally in Sept. both marked with X if I remember also marked for Macguire AFB.........................Scott O&O

CARC or OD Green and there used let me know. Scott O&O

you can use the blackout light from the CUCV series of vehicles they look the most correct and are 12Volt, they are plastic and would 'ave ta change the connector give a coat of semi-gloss O.D. and your good ta go. Scott O&O

what are you asking for the STE-ICE sets and what would shipping be too Allentown PA 18103 Thanks Scot

I picked up a Ste-Ice over the weekend, seems complete except for missing the Diagnostic Connector Cable W1 and the Transducer Cable W4. Anyone know were I can get these cables or have them for sale, I guess this is why I got it for so cheap. Thanks for any help. Scott O&O

Looking for parts for a GRC-193. I have the mount and all cables and the RT-1209/PRC-104 they dont have too be working parts I need the Antenna Coupler CU-2064, Power Amp AM-6545, and the Amp-Converter AM-6879, Ill be in spaces D-1 & 2 Cell # 484-264-2080 ThAnks Scott O&O

I have a 32 Gal. oversize fuel tank for a M1009 its a take out of my '86 6.2 Jimmy Ill be in spaces D-1 & D-2. Scott O&O

I gave NAPA the GM part number 14038644 and he's getting me one from GM Ill have it by Monday, they didnt have a pic so Ill have to wait and see. Scott O&O

Ok thanks for the help I got a line on one thats NOS but I have to wait for them to get back to me, I tried the junk yard route thought I mite get lucky but only found a 6.2 in a step van and that cable wouldnt fit also found one made by Pioneer auto will try to get the guys at NAPA to cross the...

When I replaced the Injection Pump the throttle cable end bushing had slipped out of the cable end/eye and is now useless, I'd need too replace it but cant find any info or a part number for it, in the pics it is the distorted black grommet, the sleeve fits inside that and it is slipped on the...

HUMVEE's are 24volt electrics thrugh out not a 24/12 system that is used in CUCV's

Thanks never thought of that

Anyone out there know if the three groove crank pulley from a civi 6.2 is the same as the military 6.2 crank pulley. Thanks for any help, Scott O&O

Ill have to look but that line if I remember correctly is for fuel fired arctic heaters. Scott O&O

You need a 700R4 out of a Diesel a Gasser 700R4 is a different beast and the gearing cant be the M1009 ratio ya need 3.73 or 4.10's with the 3.08 you will have serious heat problums. Scott O&O

Thanks thats the ticket, pull out and twist counter-clockwize needs that pressure when you turn it. Thanks for the help, Scott O&O

thats what I tought but it seems to be attached to sometning feels like a spring if you pull on it, it snaps bak if you turn left or right it sprigs back maybe not pulling hard enough just afraid to screw it up. Thanks, Scott

ADDING Pic