Search results

MARINES were big on the M38A1's still getting them in the 60's

There is a site dedicated to the M151's try g838.org or G503.com and go to M151 section there is a wealth of info not to mention the pictures, the biggest change was the beefing up of the rear suspension. Scott out

Welcome to 4X4 Magazine

Iam parting out a '86 Jimmy 6.2 Diesel if anyone is interested in a 31 gallon tank, tilt steering wheel, class 3 hitch, reclining front seats and a swingout twin jerry can tire holder made by Kayline let me know and Ill bring them along Ill be in spaces D-1 & 2. email me at m151a168@yahoo.com

The REG.# 85K1355 it was delivered to the USAF

The K is for Tactical not Utility I think that would have been a B those vehicals were painted Strata Blue. Scott out

Ya might want to make sure its the same length as the one your replacing Ive found aftermarket ones can be off, check with the local trans repair shops mite luck out. Scott out

Ive been piecing together a Hot-Water Heater Kit and Iam in need of the Heater mounting plate part #8710641 its what the heater assy. sits on the plate is mounted to the fender under the hood, if anyone has one and can help me out id be much abliged pm me or send a email to m38a152@hotmail.com...

there from a camper shell,ya have ta find out what company that used them could be stamped on the frame. Scott out

Make sure you check what side the fill spout is on got a 31 gal. replacement for my civi Jimmy spout on the wrong side I think LMC was one of the ones I had checked with

Anyone have any idea what this marking means on the middle of the hood both doors and tailgate a WHITE TRIANGLE with ACC in the middle of the triangles on a M1009 any ideas. Thanks Scott

They put that on the doors so when your re-fueling you can look at the door to fill out the card with that vehicles registration have one on the fuel filler door also if it doesnt match the one on the doorjamb plate the door was probably swapped. Scott out

The Arctic Kit Hood Insulator was on the inside also made for a great sound dampner

nopicsAnd a price

Benchseat out of a M1008 ???

If you have a early M151 not a M151A1 then that is what you want it is my understanding the M151A1 tie-rods are different you mite want to check with Frank first. Scott out

I have one havent been able find any info but have been told it could be a broadband antenna I had it hooked up to my PRC-66 Miitary Aircraft Radio and had New York air control at 339.8 on it, havent been able to test farther. Scott out

Are there any problams that i may incounter when I replace the tailgate on my M1009 just asking because I have limited acess to a garage and Id like to to do this as fast as possible. Thanks for any help, Scott

Have you checked the belts for tightness. Scott

Ihad a check valve that wasent dirty but it was stil stuck when I pushed on it took 3 or 4 shots of carb cleaner and a blasts from the air hose till it loosend up, just a thought. Scott out