Search results

I ordered the Electroswitch. Today, I spent some time studying the wiring diagram. Does the Electroswitch hook up following the numbers on the K/N Blue S1? Since you are the pathfinder, I thought I'd ask for your insight in order to proceed, when the switch arrives.

I found a switch from Electroswitch for 94, S&H included + tax. Looking forward to installing and then following advice about setting injector stems equally.

Installed Injectors. Ran about 5 minutes or so roughly, white smoke. Cleared up after I remembered to tighten the I/J clamps. Temps were in the 185-190 range for 2, 3, & 4. 1 was in the 160's blocked off air climbed to 180's. Still not really smooth running. There must be a way to fine tune the...

Thank You! I have been reading and exploring the postings. This has helped me considerably. I looked into the interior of the motor, as much as i could. It is very, very clean. The metal has no residue found in motors with lengthy periods of service.

I ordered a set of injectors. 2 were not working. I also found a u-tube video on a 3cyj teardown and assembly. They had applicable info, interesting. Status: AWP.

I noticed the difference, but did not well process it. Thank you. I was curious about that. All the way to the CCW it ran, but popped and made some white smoke. So, I moved them around to see if I could improve performance. That helped, but my system was not efficient. The set runs. 60 cycles...

Good thought. I had not thought about that. It is certainly not hard to do.

Well, the Mod w/ a fuse and a MOV is done. I started the set today. 60cy/240v charged batts. Ran rough. I/p's ccw to stop. Initially black smoke some white. Cleared up some. Temps #1 170, #2 190's,#3 190's #4 220's. I did not remove and clean the IJs It may make more sense to buy new. I have not...

Thank you! I ordered 10!!

Ordered them from MOUSER Tomorrow fuel and priming when the parts arrive.

Ordered them. Thanks for the guidance. I did not know anything about them.

I did not order the 14D151K MOV, the in-USA appears to be out of stock. I will run the motor soon , but pull the fuse on Pin 8 to disable the gen head. In the mean time, i will find the MOV.

What are Stickies? I have been reading the Generators Forum and have seen pictures. The info is great. I copied and pasted on MS Word some info.

Well, I attached the fuse, but am waiting on the MOV. Today I also checked all connections, except the twist kind. Tightened several. Vacumed out sand and crud. Tightened adjustment cable. Prior work: cleaned IP's and lines. replaced fuel return line. Cleaned attachment ports in I/J's. Cleaned...

More MEP-803A Pictures

Some pictures MEP-803A

I found one on EBAY Marketplace, locally for $750. Hours 78. Fuel Tank nasty red muck. Filters completely clogged. Metal looks good. Radiator and coolant good. Aux pump removed. Main pump removed, aux sitting inside. IP's rusty, but removed them and cleaned/unstuck two. Cleaned injector lines...

Thanks for posting this. It helped me to better understand how this part works. really helpful!