Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
I got an 818 with heater. When I picked it up it the top, mirrors and exhaust stack had been removed. When I got it running it blew a lot of water out the exhaust, I thought it was all rain water. The coolant tank was low, it took more than a gallon after I shut the truck down, while it was...
My Deuce will not build more than 60 PSI. I though it was a bad regulator. I got a replacement from NAPA, but I still have the same problem. The regulator is the unit that I turned up on a search of this site. It has a range of 105-120 PSI. The prior owner installed an air assist steering...
I have a deuce with air assist. I have had the truck three years and it has worked fine. Recently it will not build more than 60 PSI and the buzzer pretty much stays on. I adjusted the regulator on the firewall in and out and it would not change the air pressure up or down, the truck stays at...
I saw an interesting motor that might be neat in a vehicle like a samurai. The motor is a Continental Mdl TMD27 4 cylinder diesel engine Sn 91120129. The motor puts out 66.5 HP out of 2.7L.
What was this motor used in? What transmission bolt to the flywheel? Any information appreciated.
I have been looking at 5 tons recently. A good number of them are coming through with the front portion of the air cleaner assembly and filter missing. A friend in the national guard said they were being pulled off due to potential haz mat contamination.
Any good ideas on getting replacement...
I got this done late fall after a lot of late evenings. I have run it around a little and it seems a little more peppy than when it was a 6x6. I like the more compact size. I have another deuce that I will keep basically stock and a third that is going to be converted into a camper.
I cut...
I have two Deuces to pick up. I am plan to bob one. I have read all the posts on the process. I need a source for the springs to use in the rear. I understand that Deuce front springs and hangers are a good option, but can't find a retailer listing those items. I am watching a few auctions...
Got a deuce in Chambersburg. Drove it 110 miles home. Ran great. Too loud so I added the NAPA so many have referred to.
Waiting on the SF 97, went around with GL, DOT and DOS.
Running it around the farm in the mean time.
Thanks for all the good info and helpful folks on this site.
First, I really enjoy this site. For the past several months, I have been lurking daily and learning a good bit. I bought a Deuce in an early January auction and picked it up in mid March. I drove it home to Berks County from Chambersburg 110 miles, it runs great. I have run it around my...