Search results

Sounds good...pretty similar to my plans. It's just hard to find a A2 tank in G. I plan to use a 5 ton valve for the feed and return line.

That's true love [thumbzup]

that hits the nail....exactly how i feel :-)

Hello Rusty, i don't plan to sell these. Thicker material would require a larger press :-) Greetings Juergen

Hallo Brian, sorry for the delay! The plates are laser cutted before the bead was formed. I don't have a laser, but with a .dxf .dwg file it is easy to order the plates. Greetings Juergen

Welcome from southern Bavaria :-) Greetings Juergen

thanks @ all! It was fun to mill 2 steelplates for pressing the bead and get these results. It's only 19 gauge (1mm steel) but my 10ton press is to small...

Summitracing has some nice exhaust pipes in 3,5" , it shouldn't be hard to made a new one.

Yes, i plan to use backlit gauges, but not necessarily. I've got very good results with a 24V LED stripe just layed around the gauges and fixed with glue. The extra holes are for 12V voltmeter, EGT & boost.

First trial to make a new dash panel.

The c8.3 is as long as a Multiflop. https://www.dropbox.com/s/q1vl3e8z8axecnv/IMG-20150922-WA0001.jpg?dl=0 https://www.dropbox.com/s/ftxtfd9voet85dw/20150917_165814.jpg?dl=0 compare the oilpan flanges... with the shorter B5.9 you have enough room for an intercooler.

Thanks for sharing! Great truck[thumbzup] Greetings Juergen

http://www.steelsoldiers.com/showthread.php?108993-paint-job I've repaired the old one. Luckily there was only little rust damage. Greetings Juergen

no big deal :-)

if you think so... To retain the correct steering geometry you'll need the whole front end...in this case it would be easier & saver to use a complete frame, with drivetrain and just swap the cab.

As far as i can see it, the problem is that your HF has a single groove and not a full grove. There are versions with full groove available. With full groove you can mount your pitmanarm in any way you want. With a custom made pitmanarm it is possible to mill a second groove in the...

nopics

:mrgreen:There are also some shelter conversions (S280 for example)

http://www.steelsoldiers.com/showthread.php?99616-Jeep-Seat-amp-Bench-for-M35 :mrgreen:

I've made a wrecker bumper, the brushguard is similar.... simply heated with an acetylene torch and bend around? some roundstock. Soldier B is very helpfull:mrgreen: I hope that helps. Regards Juergen