Search results

gringltaube, I did not make the comment to be sarcastic just a simple statement. I appreciate all the help. Again thank you Sir. Now maybe you can help me with another thing, I have mounted and dismounted a few tires in my time but not with run-flats, if they are in the TM's to you direct me to...

gringleltaube, I have read lots of threads on the balancing, I was trying to get some advise on what works the best. I guess I worded it wrong. I also wanted to hear from someone who has done this before that could give me some pointers to make it as easy as possible. I do know to start by...

I forgot the Pic.

Can someone tell me what does this wheel fit. I would also like to know how hard is it to remove the tires from this rim and install them on M939 series rims. Any suggestions will be appreciated. Any suggestions for balancing, golf balls, beads ect. I would like to know how the Military...

I had that problem with my M932A1! I got the air up to 120 and locked it in and nothing, while the truck was running (in neutral and brake applied) I got under the truck and made a few taps with a small hammer on the actuator at the transfer case and it broke free. I cycled it several times and...

I had the same problem. I just got a 923A2 and after a week or so the light on the drivers side blew, I had a new one in the box so I installed it and it worked for 4 maybe 5 times and it blew. I took one out of another truck and put it in and it seems to be fine. I don't have a meter to check...

I made mu 105 sit level with my 1 Ton by removing the pintle and welding a 5/8 plate down with gussets welded back to the frame, I then welded a piece of c channel that has holes in it for adjusting the hitch height on the front of the plate. You can buy them at any trailer parts place or...

I will need a spot to park next to Trailboss if possible. There goes the neighbor hood!

It also had the keys!

My 2 cents! The best way to have your questions answered is to make a fisical inspection either do it your self or have someone close by do it for you. I prefere to do it myself and only bid on items close to me that I can inspect ( I learned that the hard way ), if I were to buy a 5 ton from a...

I like it just like it is also. I want to know how are the seats, as comfortable as they look? I sure would like to find a set. Could you post some detailed pics of the inside I would like to see the interior set up. Thanks

Mine is the same way on one of my trucks and when I start it up I am looking for problems. I will correct it asap. I like safety items of that nature, a hard hat with nothing but clear blue sky above your head, now that sucks.

My 936 with NHC250 & duels will do 60! My 923A2 with super singles will run very close to 70.

Sweet, I don't even want to know what that set you back. Are you removing the winch? I want one!!!!

ARYankee, I bought some gasket material from NAPA and made mine. Was easy and works great!

I was bidding on a lot at Fort Polk but had trouble all day getting on the site. I tried at least 20 times and it took forever for the site to upload, I gave up about 3:35.

Would the shifting points be any different? Also I have read a lot of threads on turning up the 6CTA8.3's and the weak points seem to be the trans and transfer cases, would a trans swap leave the transfer the sole weak point. I am thinking of bobbing a 923A2 and turning up the fuel but I would...

Does it have lockers? I think that is 06 year, look at the Lake City (LC) the bottom of the letters are down at the primer. That is why I say 06.

That is how I do it. I would take pictures and keep a document on it for liability reasons. Warren