• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. P

    Fried resistor

    good info I may just try to wire the old glow plugs up to 12 volts as a matter of precaution.
  2. P

    Camping in a 416

    very cool
  3. P

    putting jet fuel, motor oil, kerosine, vegi oil, and biodiesel in your cucv gas tank

    i run jp8 from time to time and its fine. but like others have mentioned throw in some lubrication, like standyne or lucas lube or something like that.
  4. P

    source for m1009 wheels

    I have a set
  5. P

    Bad news from the mechanic x)

    from my very little understanding you can have it rebuilt, not the end of the world
  6. P

    85' M1009 build thread

    she looks good!
  7. P

    M1008 bumper on M1009

    sorry some doubles of pics
  8. P

    M1008 bumper on M1009

    ok so here's the diy that mikepop sent me that you guys asked me about. I used most of it, but really just fabbed up my own brackets at some point.
  9. P

    What have you done to your CUCV today/lately? - Part 1

    here are pictures of the brackets from seatbeltsplus.com out of oceanside ca that you need to mount the hmmwv 3 point seat belts from ebay. With the kit and the brackets which are about $1.50 each you can mount up this whole set up. I had to drill one hole on each side as the retracting...
  10. P

    What have you done to your CUCV today/lately? - Part 1

    as promised but late, seat belts, and m1008 bumper on the 09. Also a new horn on the grant wheel.
  11. P

    M1008 bumper on M1009

    headed to church have pic and will post upon return. But you'll need to cut that frame pretty deep into the truck in order to accommodate the diamond plate step bumper plate. I was thinking of using the oxy acetylene rig to cut the holes, but may take your lead on the plasma cutter and hit it...
  12. P

    What have you done to your CUCV today/lately? - Part 1

    will do, sorry spent the entire day on the bumper mod and playing with the pup. Will get this picture to you folks asap
  13. P

    M1008 bumper on M1009

    gents was working all DAY on my bumper at the shop. Re-did the whole set up and fought the urge to just weld it on to my frame!!! I have three more holes to drill and than re mount it. WOW lots of work to do this but looks and works great.
  14. P

    M1008 bumper on M1009

    will do in the am for you guys
  15. P

    What have you done to your CUCV today/lately? - Part 1

    installed a new set of seat belts today, from the hmmwv 3 point retrofit kit. Got them off ebay for 17 bucks plus shipping. Very slick looking and very smooth functioning. My buddy bought a set that looks identical but felt cheaper from LMC for 100 bucks per side! I looked at these and they...
  16. P

    M1008 bumper on M1009

    cut the frame as close the the body as possible. I had to cut mine about an inch from the wiring harness on the driver side. Send me your email I will send you instructions I got from MikePop.
  17. P

    What have you done to your CUCV today/lately? - Part 1

    Put the winch inside my bumper, fits good. I forgot to cut an access hole to the drum, so everything needs to come out again. While its all off, i will paint her up with some good paint. removed the rear end and got a few steps further in installing the 08 bumper on my 09
  18. P

    M1009 Step Bumper Installation

    I like the swing away tire rack.
  19. P

    M1009 Step Bumper Installation

    So i found my 08 bumper and finally recovered it today. Can you provide instructions on the install maybe some pics from below? I took off the stock bumper today, not very functional at all compared to the step bumper.
  20. P

    M1008 bumper on M1009

    any updates, I just got an 08 bumper today and plan to install on my 09 tomorrow. I did pull the stock 09 bumper today so I hope to be at it nice and early
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks