Search results

If those pto's are for an m35 they are for the A3,which have hydraulic winches.those are one direction pto's and there also either on or off.now if you mount it on the transfer case you could make them work in both directions but would'nt do any good to drive the front winch,maybae a rear winch...

OKay i'll have to defend this guy on his paintjob,Tow trucks for yeas where usually red and white,it became a pattern for a while.Most wrecker owners like lots of lights and chrome.When you worked at night you wanted it to be seen from orbit. Now on the other hand, the layout of the red and...

I think we could have more fun with this one.... :) http://www.yachtingbrokers.com/defence_ship.html or maybae these...... http://www.yachtingbrokers.com/patrol_boats_for_sale.html

After reading that i think i'll stick with gl-1........thanx gringeltaube... CT i would guess the drain plug would be a good spot,unless you want to drill and tap a new spot?if you don't have a pto i guess you could put it in the cover plate???

Found my parts,went to buddy's gotta go back and pick up 2 tranny's for parts....one the inputshaft is froze at the bearing and the other somebody torched the nose of the input shaft off.....only need second gear and the out put shaft.....gonna pick one up for eddie gonna do his soon....Roger at...

more problems....bearings ordered should be here next week.......will list part numbers when i get everything.....here are some pics

need the alternator number and amps.My wife works at carquest,there clarksville,tn store sells to ft.campbell.....they can usually find what i need.can have her call them and find out the replacement part number.thats how i got the starter for my duece.....130.00 bucks :)

guys my trans is actually a spicer looks like the one on the right in the pic.the tag says tmc wolverhampton england,3053(no a) but on inspection buy a company that rebuilds truck axels and everything gear driven they confirm it is actually a spicer 3053a.....sorry it is a 3053 not a...

i'll take 2 larges and 2 mediums :)

Jason,I'll find out monday on the rebuild kit..we order them at work for our trucks,i'll check the clutch tonight..i'm pulling the clutch and pressure plate this evening

Thanx Kenny,i figured they where all the same but thought i better ask.The front bearing is bad also the throw out bearing and pilot bearing.thinking of buying the whole rebuild kit and just doing the whole thing since it's on the floor. the input shaft had some play in it. which would explain...

Cool inspection hole kenny,makes it easier to check rod bearings :)

Okay i pulled the trans out of my duece,first the input shaft was leaking,i pulled the front input shaft cover plate(forgot what it's called)the thingie the throw out bearing(need new one) rides on.it has three groves on the inside closest to the trans,is there supposed to be some kind of seal...

As i stated previously rofl . Lets see if i got this straight.one duece(previously with transfer case problems)pulling a converter dolly,that is also pulling a flatbed trailer,with a tank covered with a (non army issue tarp),going to pick up a 7,000lb.dozer and climb the hill at howards that it...

Well this should be entertaning aua

:ditto:

I'll be there fri,sat, and sunday :)

Just let me know when you need to get it, I can pick it up for you.

That would be a multi fuel injection pump

First pick the easiest one to get to. :) I hav'nt put one in a cucv,but on road trucks usually use a slide hammer.....of course it is easier when the hood tilts up :) .on pickups i have hit them on one side with a chisel and turned them sideways then pull the out with visegrips and a prybar.Hope...