• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. Triple C

    m920 24 volt delete

    Hold on there, what happens to the guages, lights etc aren't they 24volt or is only the starter?
  2. Triple C

    Possibility of using the winch hydraulics to run bed hoist.

    Great, thanks. The idea that I can still have both (with the use of a valve) is definately something to think about. I don't anticipate using the winch but, if I don't have to sacrifice it for a hoist......... Awesome, thanks.
  3. Triple C

    Bed attachment

    Well, I am not sure they had it on properly since they only had two of the six on there, but they had a long bolt with a washer on the head, followed by a spring about six inches long, then another washer. All that was below the bottom tab. The bolt then came up through the bottom tab through...
  4. Triple C

    Possibility of using the winch hydraulics to run bed hoist.

    Has anybody thought of or added a hoist to a dropside bed on a 925? I don't think I will ever use the winch but I could really use a hoist under the bed to create a dump bed. It looks like the bed is strong enough but I don't know about the hydraulics. It doesn't look like it would be too tough...
  5. Triple C

    Bed attachment

    Bed attachment on 86 925 When I picked up my 925 it had two bolts holding the bed on! They were about 6 inches long with coil springs. In this picture you can see the attachement tabs. I have put three inch bolts in them (6 total) and no springs. It may have affected the flexability of the bed...
  6. Triple C

    Out of balance ???

    When I brought my M925 back from Riley, my brother in law was with me. He was in the Army for 23 years as a sargent in the motor pool. He is quite familiar with these trucks and tires. When we started out it was pretty bumpy. He told me they do that for a bit till they warm up and after that, if...
  7. Triple C

    Ether start system...... Refill Process?

    I went to Napa and they had two bottle types, the 1 inch is the bottle you want. It is $50 at Napa. Don't have a part number but as was stated earlier, just tell them you want a ether bottle and when they ask which size, tell them one inch.
  8. Triple C

    pics of m923 with oversize super singles?

    What is the size difference between the two? I have a 925 with 14's and the bed is up so high it's almost too high to use as it is.
  9. Triple C

    NHC 250 Block Heater Inst.(PICS)

    Thanks Wheelspinner, when I put the number starting with 6 in the napaonline site it says they won't ship it to me but when I put the number starting with 3 in it they will! That's the way to go! Appreciate it.
  10. Triple C

    M817 Super Single Tire/Wheel Question

    I found out first hand how important a good spare is! I blew my front left tire bringing my 925 home from Ft. Riley. I would HIGHLY suggest you get the proper mounted tire, lug wrench, bottle jack, etc. Otherwise if something happens you are going to have a hard time finding one on short notice...
  11. Triple C

    Found a sweet M923!

    Think you ought go for it Glen, bet you can come up with a spare if you need one!
  12. Triple C

    NHC 250 Block Heater Inst.(PICS)

    Seemed like it did, though it was an out of the box item. Can't find it now anyway! I wonder why NAPA quoted me $95 and wheelspinner's order was $55! I called them back and they confirmed it at $95.
  13. Triple C

    Temporary Insurance Question (Binder Policy)

    That's a great idea! It WOULD make things a lot easier!
  14. Triple C

    has anyone used a M931/M932 to take a CDL test?

    Now THAT's funny - on ME! Don't see why you couldn't. The walk around would be interesting. Wonder what the DOT person would do with a front drive axle? I won't be on their pre-trip inspection.
  15. Triple C

    Temporary Insurance Question (Binder Policy)

    My $.02, when I called the MO DOT about stopping at scales they said, "Don't do it." She also told me not to buy a trip permit. The lady said, if you buy a permit, you are going to be required to abide by commercial regulations. As a private owner, not for hire, I was not required to buy a...
  16. Triple C

    has anyone used a M931/M932 to take a CDL test?

    It has been a number of years since I took my test but I don't THINK you can use a straight truck to take a class A CDL. You can a class B but if I remember correctly Class A requires a trailer. It has been over 20 years since I took my test though so keep that in mind.
  17. Triple C

    Howdy from Missouri

    Welcome to the site, good to see another Missourian! Sounds like your truck is just down the road! Good luck.
  18. Triple C

    NHC 250 Block Heater Inst.(PICS)

    Wow, I just called NAPA and they said, "It's $95 plus $10 freight - 3 to 4 days to get it." Ebay - $28 plus $6.95.
  19. Triple C

    Where to find turn signal parts?

    I have a 1986 925 and the turn signals are not working. Can anybody tell me where I can buy the part that causes the turn signal to flash (sorry, don't know what to call it!) Someone told me it was a thermal something or other (non technical terms :-D ) I am in the KC area. Thanks in advance.
  20. Triple C

    Battery question on 925A1

    Thanks Stein12501, are those gel cell batteries you have in? Where's Tebbetts?
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks