• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. D

    MEP-803 fuel pump does not run

    figure I would give another option if you didn’t like the last two
  2. D

    MEP-002A No Power To Control Panel

    I would check that your two batteries are connected properly, then test your leads on the starter. Your should here the fuel pumps for sure
  3. D

    MEP-803 fuel pump does not run

    How much fuel is in the tank? It has 2 hours on the clock which is an indication that it really hasn’t ran from the start being a 1994. Or ran and put in the corner at the reserve station. Take off the tank and clean, go through the fuel pump and all lines. This is a tank I just cut the bottom...
  4. D

    Voltage Regulator replacement MEP-003A

    Yes I figured that out this morning. And the Ct I suspect is for the ammeter/percentage meter. I am getting a crash course in electronics. I can change an outlet but anything more is Greek to me. I did follow the electrical schematics from kloppk and trouble shot the control box. I suspect my ct...
  5. D

    Voltage Regulator replacement MEP-003A

    I fixed the voltage gauge and ammeter problem
  6. D

    Voltage Regulator replacement MEP-003A

    If the CT has failed what else would be affected
  7. D

    Voltage Regulator replacement MEP-003A

    I am struggling with this ammeter. I took off the box with the main lugs and checked all the connections on the ct, rotary switch etc. i found a loose connection on the main breaker and a couple other connections that i tweeked. From where does the ammeter pick up its signal? from the CT but...
  8. D

    Voltage Regulator replacement MEP-003A

    I have an extra transformer. I’m not by my gen but it’s on the back top of the control box. Ac in dc out?
  9. D

    mep 002/003 fuel tank replacement

    Thankyou I will check that out
  10. D

    Voltage Regulator replacement MEP-003A

    Excuse my ignorance. What are the CT’s
  11. D

    Voltage Regulator replacement MEP-003A

    Ok so is M4 measuring amps?
  12. D

    Voltage Regulator replacement MEP-003A

    Yes it is rated for 80-300vac
  13. D

    Voltage Regulator replacement MEP-003A

    Switches are in correct positions. L1-L3 phase1 . Getting proper ac voltage on multi meter but gauge isn’t moving. Can I hook digital gauge to the wires going to m5?
  14. D

    Running mep002/003 on sea foam

    I would like to share my experience and how i cleaned out the fuel systems on my new to me 002 and 003. I started with removing the fuel tanks and cleaning them out to discover slime, tar, rust and goo..I put them off to the side and ran the suction and outlet fuel lines into a clean white...
  15. D

    Voltage Regulator replacement MEP-003A

    I Had a high AC voltage issue with my 003a after resurrecting it from the scrap heap, so i contacted @KKlop (member here) and within days of ordering the VR it was at my house..Now my 003 is back to normal for voltage putting out 236vac on l1-l3. Now i cannot get gauge m4 or m5 to work..I...
  16. D

    mep 002/003 fuel tank replacement

    I would love to but the prices are a little out of my budget. If my aluminum welding skills were better I would attempt to build tanks myself. Although I would probably be pretty good after the first tank
  17. D

    mep 002/003 fuel tank replacement

    I am leaning towards cutting out the bottom and welding in a new piece..the wifey isn't the happiest parking outside because 3 -003a are in her side of the garage..LOL I have one tank that has a coating that is bubbling and lifting, probably from the degreaser i had to use to get out the tar in...
  18. D

    mep 002/003 fuel tank replacement

    the bottom of the 3 tanks have rust holes. One tank has multiple rust holes. I can weld patch holes but I am thinking that one hole leads to more down the line
  19. D

    mep 002/003 fuel tank replacement

    Has anyone had any luck finding a plastic tank replacement for a 002 or 003 generator? Or a suitable replacement that is reasonable? I was going to cut the bottom out of the tanks i have and weld a new bottom on if i can't find anything that will work, but it might be a PITA.
Top