Search results

That wont execute...try again

http://www.steelsoldiers.com/member.php?u=2465

Thanks. Interesting, I see the input is 12v and output is 24v. What systems operate as 24v in the truck? The sure power I used in my M1010 is reverse of this, 24v to 12v @ 100amp.

What model number is on that dc converter..looks almost like a sure power to me.

Here are some photos pre parade. CVH20 joined me and my son, so we had one M35A2C (me) and one M35A2 w/w (cvh20) in the parade this year. I think Chris will have some more photos to post later.

Here are the photos of the trailer and assembly after removal. I put the bolts back in the holes as seen in the first and second photo. The front two bolts, nearest to lunette, are accessed from inside the recess under the mounting plate. I used a wrench to remove them. Smaller hands are...

Even being a no-fault state, you should be able to file a claim with the responsible parties insurance company. I was recently involved in an accident and had the option to file a claim with my company or the other drivers company. Naturally, I choose to file with theirs to avoid any delay in...

There are 4 bolts that hold the assembly to the trailer. 2 are visible from above and the other two are bolted in from underneath, inside the little recess. I've swapped out the units before, but never tore them down further. I need to though as I have one defective unit to repair.

I second the use of the concrete mixing tubs! They work great for all kinds of jobs.

If your interested in participating, please PM me. If you want to watch, the parade starts at 10am and is running through downtown Melbourne.

I am pretty sure that is just a M1010 issue, which you have. The M1010 is unique. Of all the CUCVs I own, you only have to make sure the switch is off in the M1010.

Great thread. I have several trucks I need to paint and have been procrastinating. Once this next tropical wave passes though, there should be several days if not weeks of dryer weather. Using a water based paint sounds like the way to go as I hate cleaning up after using oil based paint. [thumbzup]

Howdy from Sunny Palm Bay!

Howdy, welcome to the site.

Looks great! I miss San Antonio.

Looks like great fun! One year, I'll make it to the GA rally. I hope that PA system is working out well.

Sorry, but your asking for trouble if you start with the positive cable when unhooking anything. NEG is always first to get disconnected and last to get connected. Disconnect: Neg front, Neg rear, Pos front, Pos rear Connect: Pos rear, Pos front, Neg rear, Neg front Consider if your using a...

:ditto:

Tinted rears make a big difference on the '09 especially in the FL sun. Those civy seats are nice because they ADJUST! I've been lucky to find similar sets here in central FL. The grey was a common color in the civy trucks. Tilt wheel and adjustable seats make a '09 a good daily driver. Looking...

Come visit me when your ready to buy. I'll make you a fair deal on a M109.