• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. DeucesWild11

    Started filtering WMO

    CW72, Haven't seen Neat and Presentable, WMO is usually Messy and Unpresentable except to those who find it fun and exciting! :grin: How you making out with your Airpack?
  2. DeucesWild11

    Roof lights/top cab lights

    You may find that 24v lights can be pricy, if you find some cheap 12v ones you can always change the bulb itself like Rambling Wreck did. I did the same with my off road lights on the front..
  3. DeucesWild11

    My first army truck and it BIG

    Good luck with it.. Can't wait to see that build..:-D
  4. DeucesWild11

    No brake lights or turn signals?

    I am not that familiar with the Humvee but I believe it has the standard 3 lever switch. If you have it set to Blackout mode then the brake lights and turn signals will not come on..
  5. DeucesWild11

    Bringing an M35A2 out of the trees and back on the road

    Sounds like fun.. Looks like she's all there.. Best of luck with it and I look forward to the updates.
  6. DeucesWild11

    Help me buy this deuce, problem ?

    Did you try and drain out a little fuel out of the primary fuel filter? Mine drove OK but after reading up on the deuce I decided to drain the filters. Here is what came out... a bunch of rusty water mixed with diesel fuel. Read up on the TM's Specifically the PSMultifuelOperators.pdf , this...
  7. DeucesWild11

    Trickle charging two batteries in a 24v system (Ferret)

    I bought two cheap Battery Minders 12v each so I can also use on my cars. I was also told you can keep them connected but when I read the manual it said to minimize any risk to damage the charger it is best to disconnect the batteries and then charge. For the deuce it's relatively easy so no...
  8. DeucesWild11

    The Building of Big Frank!!!

    You should "Rat Rod" it Leave the wheel wells off and make up a new custom hood and such.. That would be one cool roadster!!:popcorn:
  9. DeucesWild11

    Is it worth it????

    I don't know if I would go to that extent. Not sure if you would get that all back, perhaps some of it.
  10. DeucesWild11

    Great Deuce Info Site!

    Cool webiste thanks!
  11. DeucesWild11

    M35A2C master cylinder failure?

    Ditto on what DH said, I would do the same. I don't have the same set up as you but I had a bad airpack and MC with brake fluid blowing out the vent tube. Knowing what I do now, I would do all in your case. If one is bad the other could be right behind it. With trucks this big brakes are a...
  12. DeucesWild11

    expensive lights

    I hear ya Crazy Welder, Always sounded a bit high to me too. I was thinking of converting to some new headlights with 24V H4 bulbs in them. I thought that may get me some extra brightness and would be easier to exchange just the bulb when they burn out instead of the whole headlamp. Actually...
  13. DeucesWild11

    M35A2C master cylinder failure?

    Sure sounds like an internal seal issue to me. I rebuilt both my MC and Airpack. Do you have any brake fluid coming out the slobber tube on the side of the engine? That could also suggest an internal seal issue.
  14. DeucesWild11

    My Deuce build

    The 395's look sweet, I look forward to your build! Stay safe over there!
  15. DeucesWild11

    Rustoleum Leak Seal, First Impressions

    Thanks, that may work out great to tape off and spray over where my hard top comes together with the back panel and where the back panel meets the cab. (To keep rain water out of the cab) Too bad I already used some clear silicone over the rubber gasket! There are probably a bunch of places...
  16. DeucesWild11

    New from NY

    Welcome to the site, from another new yorker! I love it here and have been learning so much about my deuce. I also gained a bunch knowledge to already start to help some others here. I think it's great you came on here mainly to provide help, that's awesome!
  17. DeucesWild11

    Bobbing my M35A3

    Wow Steve, you are rocking and rolling on your bob project... I thought I had some tools.. I wish you were closer, I would love to hang around just to give you a hand and soak up some knowledge! I love fabrication!! :lol:
  18. DeucesWild11

    Oily vent pipe

    Well speaking from the experience I had, check your Brake Fluid in your M/C. You could have a leak somewhere either in the M/C or Airpack if you are loosing brake fluid. Based on your experience with the amount you are seeing, it's probably not but doesn't hurt to check..[thumbzup]
  19. DeucesWild11

    My M35A2 Project aka Big Betty

    Nice write up and pics, looks like you have a fine truck there.. I have had mine about a month or two longer than you but you really have gotten into some projects with her. I am pacing myself but have done a good bit of work to her. Still feel like there is allot to learn.. Best of luck with...
  20. DeucesWild11

    Jerry can project

    CycleJay, I believe I bought a brand new spout with seal just like the one shown in the original pic except it is a shiny new spout..from Kenny Kublos when I was at the Sussex show. He may still have some, check him out at Kublo's Military Surplus Can't be too much to ship it..
Top