Search results

Are You talking about the plug in the top or on the side? My truck does the same thing only leaks under load.

I too have a cold blooded Deuce,the date code on the batts is Aug.02.I think the cold has killed them, they were fine above 30 deg. but this last cold snap (5 DEG.) has yielded about 20 sec of crank time then they start to fall flat.I charged them each individualy and still died quickly. I...

I Think those are 5ton Bridge truck tires and rims.They will not fit a Deuce or a regular 5 ton.They have to have the wheel spacers as the offset is so great.I think they are about 49" tall.Were those on Ebay?

RE: I I thought those things were diesel ! :P If your out of gas that is really bad,if you are out of diesel that would not be so bad.

This is for all the guys that use bolts,roll pins,hair pins or any other item not a shear pin. This what could happen.I spoke with Memphis Equipment today,they said this is the most common part that they sell for winch repair.$311.00 plus shipping buys alot of shear pins. I bought this used, and...

RE: Re: RE: M35A2 in Richmond on GL... need help Take a day off work and go inspect it.That is the best thing to do.What the other members say about condition is correct,don't go by the cond. code.Read up on them,you will need the knowledge anyhow.More important is ,how you going to get it if...

No ,I just opend them up for the pic's.

Some snow in Northern Pa. but roads were pertty clear. Chuck, do you think this was a gun truck? The placards say 1.5 blasting agents,1.4 blasting agents and explosives.I did find two spent M16 shells in the bed.

53 HTC , 3 142 AVN The Motor Equipment Dispatch is from Latham NY.

The only thing that I found wrong is the fuel gauge not working,needed wiper blades.I drove that truck back from Chambersburg,so it was just the cost of fuel and lunch.I had a buddy share the drive back.

Here is a pic of my new deuce.I wonder what they were hauling in there?

This also happend to me a couple weeks ago.I placed a bid on a truck,and when I went to check the status of the bid(after auction ended) I could not find it,and it was not in my bid history?

I was just there Monday,posted I was going, but it got worked down the list pretty quick. I looked around a bit ,let me know what you are interested in maybe I looked at it.

Kenny,You didn't have any trouble with the pto in place?

I agree with the total removal of the latex.that "should "come off easy.have you thought about rhino liner for the floor?

Why not get one of these,A/C,heat,power steering,quiet cab,radio,130+hp,top speed 22mph.After you get your deuce you will know what I mean.but if you gotta do it with a deuce why not gang mowers like the golf course.You can mow alot of grass at 56 mph!

RE: This can There is one other thing to check that is very easy,check the hose behind the oil filter cans,if there is a leak there it will drip down on the rim of the oil filter base.It is a good thing the oil level has not gone up that would tell me there is a major problem.

RE: This can I had a deuce that did that,my problem was a missing head bolt.I would not let it set all winter with anti-freeze in the oil.It will do alot of damage in side.I would drain the oil and the anti-freeze.also pull the battery cables so you don't forget it has no fluids! did you run it...

I thought that the bio had a higher solvency which reduced lubrication?

Sorry to hear of your troubles,but glad you got it off base.just think if nothing would have happend you would not have any story's to tell. Oh by the way I was not trying to say "tow the 5 ton with the M35" just off base to the nearist parking lot. It would do it ,and with the right amount of...