• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. A

    From fire truck to MTV

    Taking it out most weekends and having a blast just getting away from the house. Long trips coming after completing the tires.
  2. A

    From fire truck to MTV

    Was doing a little testing of the Eco hubs and suspension deflection. No issues rubbing or traction. Drove over some 18" rocks and it was pretty controlled and didn't need much throttle in 1st. All new rubber from the Goodyear Commercial dealer. Took a little work for them to get. They showed...
  3. A

    1083A1 doesn’t run longer than 45-60 seconds

    I would check for a clogged tank vent.
  4. A

    LMTV FMTV front axle outer seal replacement

    I found a screwdriver works much better than the seal tool. You can slowly work it in from the screwdriver pushing only on the metal portion of the seal, and you don't have to push that hard to drive the CTIS seals in
  5. A

    Have an FMTV, how is the MTVR in comparison?

    Appreciate the detailed assessment!
  6. A

    Have an FMTV, how is the MTVR in comparison?

    Any thoughts on this one? I really like the mk25 winch. Seems like a pretty new example with A/C. Assuming tires will still need replacement. Looks quite complete...
  7. A

    Electric AC?

    I plan on a different route. Since I have the habitat temp controlled with heat pump and diesel heater options, I plan to run ducking from the habitat to the cab. Using 1 or two fans to force air to vents in the turret cover, then the air recirculates through the pass though. I like the idea of...
  8. A

    What have you done to your FMTV or LMTV today

    Neat, didn't know that. I was unable to find a spec for how far to run the nut on. Right now I have the nut just past the end of the valve stem (maybe .05" of the valve stem protrudes).
  9. A

    Have an FMTV, how is the MTVR in comparison?

    From what I'm seeing recently, looks like $20k ish can get a running one in decent shape. Seems like a lot have "blow by" though. I wouldn't even mess with a non-runner as it could have a dead engine or transmission and who knows what else.
  10. A

    What have you done to your FMTV or LMTV today

    They are not. The angle of the hose is slightly different, the internal threads valve threads start at the end versus being inset, the external thread doesn't have the "cross" on the end, they have a slightly different black seal (I put NOS orange on). Smaller diameter protective hose. They...
  11. A

    What have you done to your FMTV or LMTV today

    Tried the first tire change, new valve stems and orings. Unfortunately after a few minutes test at 100psi, it started leaking. The seal (NOS) migrated and a gap formed. The seal was compressed appropriately (unlike the ones I'm taking off that have all been crushed to oblivion). But the...
  12. A

    What have you done to your FMTV or LMTV today

    Son of a.....I've wanted one of those!
  13. A

    Thoughts on removing coil springs on A1R

    My A1R has 4 in front and 5 in back (M1096)
  14. A

    Thoughts on removing coil springs on A1R

    I've got a couple ratchet straps and a rental spring compressor from AutoZone, all good to go! Okay obviously not, don't want to Chucky myself. First I'll just take the assembly off and measure differences in ride heights.
  15. A

    Thoughts on removing coil springs on A1R

    I wasn't talking about custom shocks or anything like that I merely mean removing the spring from the shock and putting the shock back on.
  16. A

    Thoughts on removing coil springs on A1R

    Noticing just how stiff the front end is over bumps and it's lack of articulation got me thinking. As far as I'm aware, the leaf springs are the same on the A1R A1 A0. A1R adds those large coils as well but for what benefit - some have said for the ability to carry armor in the future. Seems...
  17. A

    What have you done to your FMTV or LMTV today

    Little do my kids know....when they loose interest in the pool I will turn that into the new parking spot!
  18. A

    What have you done to your FMTV or LMTV today

    Changing some tires, replaced the drag link. Got myself an air hammer and it's my new favorite tool, popped the drag link tapers right out! Next to try it on those large torque rods....
  19. A

    Have an FMTV, how is the MTVR in comparison?

    Have an A1R version (so the newest with the Cat C7). Considering picking up an MTVR in the future as I'm seeing quite a few popping up on Govplanet. Are there any key reliability issues with the MTVR? I'm liking they can go 65mph max versus the 58 of fmtvs (unless eco hubs added). Seems like a...
  20. A

    M1078A1 cab and chassis electrical upgrades including AC

    Regardless of the level of insulation, given enough time anything can get extremely hot. The more insulation the longer the process takes. I have a 9kbtu mini split and it easily(less than 20% duty cycle) keeps the 20ft shipping container comfy during 90 degree temps in full sun.
Top