Search results

I need an m818 moved this week September 16th, pickup between 0900 -1400hrs, delivery is flexable. Thanks Chad

Just because you are a farmer and or the vehical has farm plates your still bound by the same weight restrictions and the 150mile rule, it's the same here in Wisconsin. Now if you hooked up a van trailer and was dragging it around not doing farm business than I guess you can get ticketed, but...

What was the top speed?

You said it was slow, did you start in low range on the transfer case then split to the high range to get everything moving?

If your looking to haul trailers around (civilian) your going to want to stick to the 11/20's, the fifth wheel plate is up pretty high on these trucks compared to over the road semi's.

Your local Napa can get the filters for you just tell them what type of engine, my local napa still has books for filters and some replacement parts.

In image #1 there is a 5ton sitting 2nd from the left, what type is it? Condition, milage/hours? Price? Thanks

PM sent on the tires.

Saturn surplus carries some parts, I was suprised that my local Napa store had a book in back with the oil filter numbers. I'm going back to pic up extra filters and I'll see what else they can get. I belive these engines were used in the civilian world to, I just can't remeber in what...

waste oil PM sent

Did anyone see what the 816 went for?

I had good luck at my local Napa, they still had a book for this engine behind the counter.

Part #1503 is the Napa gold oil filter, I used the above part numbers and my counter guy said the ac would cross to a Napa filter. What suprised me is he still had a book for it behind the counter.

I'm also in the market for both fuel tanks for a m54 gasser, If anyone has one or two I would be very interested. Also the fuel selector switch for right/left tank Thanks

My 16x20 are the same way, all four of them looked wavy and it got worse when i aired them up to normal operating psi. I have a bobbed 5ton and i didn't need to run them that high so I brought the air presure back down to 75psi. What presure did he run them up to? If i remenber correctly the...

There is a set on ebay eBay Motors: 1986 CUCV M1009 Military Blazer electrical transfer bar (item 130297016337 end time Apr-05-09 15:05:33 PDT)

So does any one make an air locker for a 5tn? It seems like it could solve the stresses on the drive line when on road and be able to lock them up when needed.

Have you looked into oval tubing? Great post by the way, looking forward to see how it performs.

Use a good mild steel or stainless seamless tubing and you wouldn't have to worry about it. Weld it up and use V-band claps to hold it together.

Someday I'll own one, looks great. Love the name.