• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. m376x6

    AVM vs Ouverson: take a closer look!

    Thanks Don, some useful information instead of flaming inuendo and guessing about product durability. Very much appreciated. All steel, whether cast, forged or cut is alloy. Depending on the content and quantity of additives they determine things like corrosion resistance, hardness, torsional...
  2. m376x6

    AVM vs Ouverson: take a closer look!

    AVM/Superwinch The AVM's and their cousins imported by and sold under the Superwinch name are made in Brazil, Sao Paulo to be exact. The pictures are shocking, the level of mass displayed between the two is impressive, with the Ouverswon's (sp?)being very impressive indeed. What are the price...
  3. m376x6

    Selectro hub # for M37

    Selectro Hub number. Yes, 11022-01 is the correct part number for the Selectro Hub. Regards, M376X6
  4. m376x6

    Bobbing my Deuce

    I remember you listing the link earlier in this thread. I reopened the link and saw where you cut the center out of one rim and then cut the depth you needed and then welded the two pieces together. This gave you the width and also the offset for the wider tire. Simply ingenious. I've been doing...
  5. m376x6

    This won't work.....

    Over the last 25 years or so I've had good luck with the Harbor Freight and the like cheapies. They'll run anywhere from 15 to 35 dollars on sale and use a one quart siphoning type can. Some were teflon lined and some were just plain aluminum. They run great on pressure anywhere from 45 to 60...
  6. m376x6

    Adapters for LAV wheels to M37 and variants

    LAV stands for Light Armored Vehicle. it is a Marine 8X8 that uses 16 inch tires. I believe the tires are now slightly larger than 11.00 but are still 16 inch. There are lots of pictures of LAV-25's on the internet. I finally found a picture with a good view of the lug nuts but haven't found a...
  7. m376x6

    Bobbing my Deuce

    What size tires are on it here in this pic? Would you mind telling me about the wheels. It's regretful to hear you had to sell it. What a great truck. Regards, Bryan
  8. m376x6

    SS members unite :D

    Here to Help if I can. I'm in the mountains west of Denver near the divide, if he comes through here I can sure help out if I'm not at work. :cookoo: Regards, Bryan
  9. m376x6

    updated pics of my hemtt restoration

    WOW A rebuild and retrofit that even a contractor couldn't touch. I wish we were closer in location. My compliments to you young man, you have done a phenominal job. One of the commandments says something about Thou shalt not covet thy neighbors wife, He might have spent a few minutes deciding...
  10. m376x6

    Advantages of 24v

    Okay There are, as with any system, advantages and disadvantages.
  11. m376x6

    Bobbing my Deuce

    I've worked out a design that will let me select locked rear, in phase rear, and out of phase rear steering. The box will feedthrough to the front power steering without interruption for safety. The lower output to the rear power steering box will lock at zero degrees in front only selection...
  12. m376x6

    Empty from CO to Barstow and back

    Thanks Thanks very much for your offer, Kurt has decided he would be better of paying FedEx as he is very far from Barstow and that trip alone would cost more than shipping direct for him. Regards, Bryan
  13. m376x6

    GSA run in the deuce (holy cow!)

    Please Stop It has gotten to the point where I look at pictures of these Bobs and my stomach gets queazy and aches. I've got the Bob virus really bad. And the fact that this is a beautiful job makes it even worse. :drool:
  14. m376x6

    Empty from CO to Barstow and back

    Tires Hi Joe, let me contact the fellow who bought a set of 11.00-16's from me. This may be ideal to help you with fuel and him getting his tires. I have another fellow who bought some other tires from me and is going to Springs to pick up a truck and maybe I can help him out so he doesn't have...
  15. m376x6

    Adapters for LAV wheels to M37 and variants

    Adapters I've worked out the machining process for an adapter that will bolt on to the Dodges and then use lug nuts for the LAV wheel. No welding involved. My hold up right now is finding a lug nut so I can source them and the lug bolt that will fit the LAV wheels. Regards, M376X6
  16. m376x6

    Need Shackle 12355838

    I've been all through CM's website. They don't make a civilian equivalent. Thanks though. Regards, Bryan
  17. m376x6

    Need Shackle 12355838

    A Mack Thanks Beastmaster. It may look deceiving though, they use a 3/4 inch pin or bolt and are a 1 1/2 inch inside radius. Probably not as large as sometthing on a big mack. But maybe. I'll post a pic tomorrow on where they're going on my M37's. Regards, Bryan
  18. m376x6

    Need Shackle 12355838

    I have three shackles and need a fourth. They are made by CM Forge whose distributors freak out at the idea of dealing with military items. The number on the shackle is 19207 12355838. These are normally installed on the M116's. I need just one. Thanks Regards, M376X6/M354X4
  19. m376x6

    Bobbing my Deuce

    Already on that chalkboard, I'm deciding on whether to use a manufactured scissor lift or design and build my own hydraulic package because of the custom building. I'm leaning toward a resized original bed as the dump bed. I have also designed (preliminary) a selectable rear steering linkage. I...
  20. m376x6

    Complete M37/M43 Winch setup

    I haven't priced one lately but what would be a going price on a complete winch setup. It includes the following: Braden LU4 Winch Bumper and extensions and mounting hardware PTO and shift lever with locking bracket, rubber floor seal, and PTO to winch shaft. Cable with chain lead and...
Top