• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. R

    Anyone near Fort Gordon GA to do a small recovery?

    Looking at a small generator ( around 150 lbs) at Fort Gordon GA that may need to be recovered . Thank you!
  2. R

    Transfer case interlock

    Maybe here to. http://www.steelsoldiers.com/showthread.php?115884-Air-intake-stack-vents-and-bypassing-axles
  3. R

    Transfer case interlock

    And here. http://www.steelsoldiers.com/showthread.php?103819-Transmission-Fluid-In-Air-Intake-Canister-M923
  4. R

    Transfer case interlock

    Try here for a start. http://www.steelsoldiers.com/showthread.php?85516-Oil-leaking-from-high-gear-transfer-switch-1990-M923a2
  5. R

    Transfer case interlock

    I believe there is a post on here about this from a few months back. Did you try searching? Sometimes there not to bad to find. Sometimes there a bear.
  6. R

    Chains for M939A1 and A2 series vehicles

    Good to know !! Thank you !
  7. R

    No Headlights on my '90 BMY Harsco M923A2

    Did you check and pull the bulbs to see if they are plugged in all the way? or if they could be bad? I got a truck that 1 the ground was unplugged. And the other had a bad bulb lol.
  8. R

    Need Some Assistance

    Here is a better link to the same post. http://www.steelsoldiers.com/showthread.php?124251-925a2-not-shifting-past-3rd
  9. R

    Need Some Assistance

    Found it !!!!! I really think this may be your problem. It took a while to find. http://www.steelsoldiers.com/archive/index.php/t-124251.html
  10. R

    Need Some Assistance

    Ok I found 1 post that talks about if the Trans cable was not allowing the throttle to go all the way forward and was sticking on a m925a2 he also said after it was adjusted and lubed the 2nd gear to first was no longer harsh.
  11. R

    Need Some Assistance

    On the injection pump is a cable that adjusts on the injection pump side I think it has to be like 3/4 to 1" of slack but there is a few posts on how to adjust it properly. Mine was sticking and I just lubed it with wd40. If the cable is missing adjusted it won't let it go into 5th. And the...
  12. R

    Need Some Assistance

    Are you sure its going into 5th? It kinda sounds like the cable from the injection pump to the Trans maybe miss adjusted. It's happened to a few and won't let the truck into high gear or reach top speed. There have been a few posts on here about it. Worth A Look And see. If it's in 5th gear and...
  13. R

    What have you done to your 5 ton this week?

    Replaced a bad air line between the engine and frame of my m923a1. Swapped out a leaky 1600 on my m920.
  14. R

    Need Some Assistance

    Is the engine getting to full rpm ? Does the engine rev freely? Does the transmission seem to both down shift and up shift correctly? Does your turbo spin freely?
  15. R

    M936A2 Level Winder?

    Saw a level winder on a A2 at delaware gl about 8 weeks ago. They had close to 20 that sold. Out of the 20 1 had it on it.
  16. R

    New M923A2 Owner

    Don't know where they got there hose clamps from . But I had a broken 1 to on my m923 a1 a RRAD rebuild.
  17. R

    M923A2 Won't start... All the lights work though!

    Thinking back. My m35A3 did that to me a few times. Ended up being the power on switch was bad. Try cycling it off and on a bunch of times then try starting it.
  18. R

    M923A2 Won't start... All the lights work though!

    You could have a shorted battery. Happen to me more than once. No current to turn the engine over but had 24v
  19. R

    M936A2 Need Engine Assistance

    John Appel had a good engine a while back. he is in PA 410-808-5227
  20. R

    Detroit locker question

    It sounds like you have a limited slip differential instead of a locker. Lockers are extremely heavy duty and give you posi all the time. They unlock momentary when they bind in hard cornering. I had a locker jam once on my m920. I thought I had broken a axle. But when I took it apart I found...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks