Search results

Wow that seem high !! Perhaps you voltage regulator is bad ?

Couldn't you see !!! Its the RARE all Green version !!!! ;-) Also noticed a 10/12 delivery date ? Maybe a RRAD rebuild ??

I had a high beam low beam switch go out 1 time ( floor mounted style ). It drove me nuts til I figured out the switch went bad.

Any hose place that makes up hydraulic hoses and fuel lines can make 1 up for you. Also places that repair hydraulic cylinders should have all the fittings to make it as well

Went to Henrys Engineering in Prince Fredrick Md. Took my old 1 with me and they made me a stainless braided Teflon lined hose. They had to give me 2 pipe adapters with it. And I had to use the 2 old fittings to reattach it to the original copper pipe. I'm so glad I have it fixed. It about wore...

Merry Christmas my friend and have a safe trip !!

What's the NSN on the stripper pole ??

Went to my local hose maker today and $20.00 later I now have a m923 a1 that has 120 psi of air in about 4 1/2 minutes while idling. No more 20 min of 1500 rpm to get it pumped up :-)

Nice looking truck! ! Any interior pictures?

That was funny !!

I had that line off and checked it in my shop.also used soapy water to check it installed. I checked all the lines under the hood with soapy water.

Read it before. I guess I got lucky that mine got a new engine :-)

Ok after digging around I found out my RRAD truck has a new engine in it. The truck is a 87 . the engine tag shows the engine was new from Cummins in 3/10 The truck was rebuilt in 7/10 which would make cense .

I believe I have found my air problem that has drove me nuts !! the flex line between the engine and the frame had a good size hole under the sheath so you couldn't see it . I was working on the unloader valve on the compressor and washed all the parts down with wd40 . And noticed a mist by the...

Sounds interesting. But how would you lift and drop it? Hydraulics? Winch? I could see it being doable.

Your either sucking air through bad fuel lines. Fuel selector switch. Or your injection pump is going bad. I'm leaning towards fuel lines as both my m813 and m816 both did it until I replaced them.

If I remember correctly they are there to access the the springs and seals.

Yes the mep007 will do 480v

True story. Had a VR board issue. Bought 1 of Jims boards. I was planning on changing it out. Fired up the generator and it works perfectly. So Jims board scared it to work cause it has worked since lol

Ditto!