• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. R

    New Castle, DE

    If you get in a pinch I may be able to help. But I'm a bit more than 2 hrs away
  2. R

    Maryland State Inspection: I need your advice!

    Pulling the tires are easy. You just need to disconnect the hoses coming from the stud and then remove the lug nuts if it's simular to the m35a3 getting the drums off your on your own lol the ctis valves should stay with the tire and rim .
  3. R

    Maryland State Inspection: I need your advice!

    Gotcha. Sorry was speed reading on my phone and the text gets small for these old eyes lol
  4. R

    Maryland State Inspection: I need your advice!

    Why are you getting it inspected?? Why not go with historic tags ?
  5. R

    New to mep 002a

    Sorry dupe
  6. R

    New to mep 002a

    Did you swap your battery leads yet to see if it turns over ? Your going to need some parts to get that running properly.
  7. R

    m939 air system check valve

    I replaced mine hoping it would fix my problem. But when I took the old 1 out it was like new inside. replaced the air governor . next im digging in to the unloader valve.
  8. R

    RRAD Rebuld questions

    The bumper numbers should tell you where it was stationed. There is a post on here by carnac. He may be able to tell you that. It's a Vin number post.
  9. R

    RRAD Rebuld questions

    Air pressure issues . I'm still digging in. I replaced the air governer and check valves. But same issue. It won't build air over 60 lbs without reving up the engine. The compressor looks new. But it could be the nice paint job. I'm thinking the unloader valve on top of the compressor. Also...
  10. R

    RRAD Rebuld questions

    I have seem that on the RMS trucks and believe they would do it at rrad to . I will say the rrad truck I have is a very tight truck as far as the cab is concerned. They did a great job on sealing them up. But mine had a few other issues I'm still working on.
  11. R

    RRAD Rebuld questions

    I have a 2011 rrad rebuild. They did what they had to to get them functional. Some people have had issues with there rebuilds. Some say there great. A medium tow bar with 1 inch pins should do the job . If the engine was replaced the data tag on the injection pump should have a newer date...
  12. R

    RRAD Rebuld questions

    If the engine was good they would just remove it and pressure wash it and put fresh paint on it. If I remember correctly only the 1s with major problems were replaced.
  13. R

    MEP-003a - Temporary Voltage Fluctuation

    just for grins and giggles did you try turning vr12 and vr15. had 1 with a bad spot that drove me nuts !!!
  14. R

    New to mep 002a

    You need your fuel line to be connected from the check valve your attached to now by the oil pressure gauge . to the closest fuel filter can on that side. after you swap your cables you should hear your electric fuel pumps come on when you turn the switch. let the unit prim a good min before...
  15. R

    New to mep 002a

    And your fuel system will never work that way ! the injector pump needs preasurized fuel to it. its not a suction pump. you need to use the pumps and filters in the gen system .
  16. R

    New to mep 002a

    well your batteries are going to the wrong terminals lol
  17. R

    M916-M920 Tech & Tips

    You get 30% off if you buy the Napa 5 gallon empty bucket!!!
  18. R

    M916-M920 Tech & Tips

    Didn't know Napa sold m916a1s? ??
  19. R

    M916-M920 Tech & Tips

    I agree with artisan. Most of the time people turn them off in the summer and forget to reopen then for the winter. There on the passenger side of the engine.
  20. R

    New Mep-002a with problems

    This ^^^^
Top