Search results

RE: My duce (well not quite) That looks like a neat rig!

Does anyone need a pioneer rack? I have an extra one.

RE: Coolant Leak Pulled the rear head today. I found a crack between the exhaust valve and injector port and on past the port. I wonder if this truck was over heated? It was in #5 hole.I think this was the original problem,but why did they take the time to put it back together? looks like it...

RE: Coolant Leak Can anyone tell me what TM i need for an engine tear down ?

RE: Coolant Leak It was in the truck when I bought it.It had about 45-50 psi oil pressure.It looks to have new gaskets. I was wondering if they over hauled it ,some one forgot to tighten the bolts and they had the coolant problem and gave up. We will see.

Thanks Kenny.

RE: Coolant Leak I only ran it a total of 10 min. divided in multiple runs ,2 min here 3 min.there.I looked down the stud bore and can see clear down to the ,I think water jacket. It is not broken just missing.I am suprised it ran at all.That would explain why it was so darn hard to start.

RE: Coolant Leak Also the head nuts under the rocker rail are finger tight! Why do you think they did not put in the stud ? Also I did not see any freeze plugs.

RE: Coolant Leak Here it is.I could not wait.

RE: Coolant Leak Sorry Guy's I have not gone any further.I am shooting for this weekend.I will report back.Walt I will keep you in mind,thanks.

There have ben other posts on this,as I remember some guys were pulling the shaft to help with fuel MPG and reduced tire scrub.others are using the lock out hubs.it is not a big project if you are a little guy. you can also do a search on the subject and I am shure You will find all you ever...

The height is really the only problem for me,as the width can be adjusted by my plasma cutter.I guess I will not be using it for hay rides so the height might be ok,besides it will help spread it from the long drop!

Hey those are great pic's ,explains alot to someone who has not seen one in action. I was actually wondering what the boom would lift not the winch. I was wondering if it had the power to lift a load of dirt,stone if there were a bed attached to it. I will try the TM but have never had any luck...

Does anyone know the lifting force of a bridge truck boom? What do the bridge sections weigh? I may have an idea for the boom and would like to know what it is capable of.

WOW that gives Factory Fresh a new meaning! Great truck!

On my last Deuce it was stamped on the frame,the one before that was not.I did find that the number painted on the bottom of the door (inside) was the same as the vin on the frame. The numbers on my frame look like they were put on by hand with a number punch.they are about 3/4" tall and span...

David Doyle has confirmed it is General Products Division.Thank's David! Now my next Question what am I going to run into when I go to get my SF 97 and title?

Mike, I have a good used one.

RE: Coolant Leak I am wondering if it froze?

RE: Coolant Leak Ok new development. I drained the oil and what was left of the water. left out the oil drain plugs ,added water when I got to about 6 gal I heard water running,sounded like pouring water in a big tin pan.I continued pouring in water intil I got about 8 gal and stoped.water was...