Search results

Guy fang, sorry it's been a while since I contacted you last. I've been out of town with work. I actually bought a new relay box brand new with red plastic caps on it so I'm assuming the A5 card is good in there. I still have no power. I checked TB-16 for ac voltage. When I was starting the...

That is great to know. Yes last time you worked with me it was the S9. Is still super grateful for that

Awesome thank you very guys!!!. Guyfang, In your opinion should I pull out the a 5 card? Does that look like the culprit?

It looks like you're thinking it's the a 5 card. I don't have a 400 Hz supply. And it is that a 400 Hz unit. Should I disconnect all the wires from the a 5 card and take it out To do the testing. Thank you again for your time sir.. You're a true asset

Thanks for all the great info! I took out the a-5 card and nothing was burnt or abnormal. I have then hooked up all the cannon connectors. I tested a5-2 To ground DC voltage. 0 Volts... I then tried a5-13 to ground dcv. I have 24 volts while starting. Is it still the S9 Speed switch...

Is this the 827 special relay?

Hope you had a good holiday. Happy New Year. And thank you for your reply! I found the terminal board with the 4 wires Back connect the generator set to the static exciter. I checked AC and DC. between the terminals. And each terminal to ground. A couple of times I've got a 2 V read out but...

1st off merry Christmas! Guyfang .... You've helped me in the past And you've been a lifesaver. I have a new problem. Gordy1ID New member Hi there sir. I'm having a new problem and I'm hoping you're still around to guide me through it. I have an MEP005A. About a year ago it was running...

For heaven's sakes you're a lifesaver. My family was originally from Germany. Last name is Zemke. I believe the last couple letters may have been played with when they got off the boat to America. Let me give you a very big thank you bud. We all appreciate what you donate. You guys have Home...

I found my problem. I replaced the speed switch i think. Left front of generator, seats in the side of the block with a Cannon plug on the top. The plunger/ cam piece on the inside was broke. I have a parts unit on-site So now the generator starts up and delivers power immediately like...

Thank you again for your reply. I removed the J 9 Cannon plug and tested the D pin (bottom pin) to the frame of the generator while somebody started the generator and held it in the start position. I did not get any DC voltage. Just to be clear I wasn't sure if I should test the wire harness...

Hi there thanks for your response. After I start the generator there is no voltage until I excite the field with a battery. Everything looks good in the voltage regulator and static Exciter. When I start the unit I don't get any voltage out of the static Exciter on pin A + B. On the Canon...

I have to excite the static field Whenever its started

Hi there. Does anyone repair the circuitry the static Exciter box? I believe i have it narrowed down to this box. Would anybody happen to have a used one? The part number is 30554 72 2605. Mep005a thankyou! Gordy