Search results

Found it....thanks

Can you give more info. I can't get it from the title and that part number isn't working on a search.

Careful not to get it pregnant...the children are expensive.

Doc found a slight hemorrhage, not terminal cancer, so give her a pat on the ...... and let her know she will be whole again soon. Sorry about the TC. Tell the wrecker to mind it's own business or it will get bobbed.

Update to Joe on At 1545. The good and bad. Your torque converter is toast...the rest is rebuildable but got damaged by metal that had to come from the TC. Fourth melted the piston but not so bad. Piston seal was 1/2 and heat did not get to the springs. Magnetic metal went from TC into...

Do you have the crank up cable type like the A3 has for the 365... Should work, I notice the rest of the stuff is about 16" lower than the frame on them. I think you need 14" for the tire. Be careful it won't hit the driveshaft, but that's further to the passenger side so shouldn't. I'm...

Amen Slate...looks like you got it....thanks. I see you have the tank on the passenger side, what if anything is going on the driver side? Nice tool boxes are really expensive. Spare?

My 817 had a similar problem. At 30 mph there was a lot of noise that I thought were dry wheel bearings. I even bought new bearings. I took it to a friends shop. We took the front and rear driveshafts off and ran it up to speed. I could see the emergency drum had some play and was a big...

There is a thread about the correct way to upload pictures even with the "tapatalk". I think pictures disappear in a short time and the threads make no sense for a later reader if the right procedure is not used. I don't know tapatalk, my pictures are put up with Ipad. A quick search will...

I ran out of rod welding the tube so the lights are just setting there. RockAuto is usually good with descriptions but they say the clear backup has a 1056 bulb and socket but what came was a 1076 bulb and socket. I bought LED for the 1056. Im going to get another red stop unit and use...

Slate... Please see if there is a rotate tool someplace.

I can't do it but this post bumps your request back up. You could be a bit further away in the US, but not much. Looks like you got a good deal on the welder.

I just buried a cat that thought it was faster than my wife. It showed up about 6 weeks ago and had no tail so we called it "bob", then found it was a female so added "ra" on the end....Bob-ra. It's funny how we get attached to our animals. I almost hate Christmas...for about 20 years I...

Apparently you really only lost the dog bone. Yes, it's a good thing you didn't get into that electric line. Things could have been worse. You didn't mention trying the emergency brake. Now you know why dual circuit brakes are soooo desirable.

Those are a recent listing and may not be too old of a tire (date code). It seems like a great deal on a fine tire that will give the clearance for at least one set on the back, maybe both if tight and you keep speed down. I planned to go 395 on my 4x4 but may consider the 365/85. Hmmmm

I think I like the red-red-white which with high and low and strobe has a lot of options.

That is 395, I believe. The 365 have about 2" more/additional space between them.

Thanks for the diagram, that helps. Being one of the slowest vehicles on the highway has resulted in deadly wrecks with both trucks and trailers getting hit from behind, so yea, visibility is intended. I've been putting a duck bill over rear lights for a long time and never regretted it but...

Here is the new light location on the back of the 4x4. I'm trying to make it compatible with most mil trailers, including air brakes. There are 1057 dual circuit LED's in the red and yellow and I had planned a single circuit 1056 but it came with the dual circuit bulb 1057. I may change the...

I know that is for the trailer, but it provides most info I need . I'm working to re-wire my 4x4 with some new options. I have not been into the TM wiring diagrams yet but notice I may not have a reverse light circuit (by your list). I want to keep the mil connection but have the 7 pin too...