Search results

I was wondering if there are any MV get-togethers with Mud or Off Road trails in Louisiana, Mississippi, or Texas that will be happening in 2009. Just purchased my M35A2 in April 2008 so I am a Newbie to medium MVs although I can proucly say the fist vehicle I ever drove was a '46 CJ2A which I...

I was wondering if anyone was going to Redstone Arsenal near Huntsville, Alabama in the next four or five days. I purchased a M105 trailer and don't have the serial number from the data plate. PM or e-mail me if you could help but I don't want anyone making a special trip. Thanks, Jim :roll...

Hello fellow trailer owners. I need some pictures and was hoping that one of you could help. The pics that I need are of the axle attachment to the springs. Particularly the u-bolts and spring plates. When I purchased my M105A2 about 10 years ago it had no axle so I purchased a military...

I have had what I thought was a M105A something trailer for 10 years now. I am looking at the data plate and thinking that I might want to have a new one made. What I find when I clean it up and strip off some of the old paint is not M105A.... I have a XM-105-E3 manufactured by Checker Cab...

Has anyone ever mounted the super singles used for the Deuce upgrades on the M105A2 trailer? I have the stock trailer and want to make it match the M35A2C when I go to the larger tires 395/85R 20 on a certain someone's aftermarket wheels that look sooooo sexy. If these are too bit, can the ring...

In reviewing the "genuine" military disc "EM 0037" dated 1 SEP 04 for the 2.5 ton truck, I can not find a MWO for the winch installation. I know that there have been many past questions in threads about this topic but one small Historical Detail calls out to me. If any of you out there are still...

I have had a small amount of moisture (fuel) around the sending unit / fuel pump access area. I took the sheetmetal cover off tonight to take a picture for a fellow Mv'er and found my problem. I had fuel under the cover where the fuse is located as seen in the three pictures. Before I go...

I came across a left and right sideboard with the fiberglass slats for the uppers and troop seats too. The steel would need repainting (for show quality) but the slats are in really good, used condition. I know that beauty is in the eye of the beholder, but what would be a fair offer to the...

What is this bracket for (see attachment)? The picture is a little hard to see. Sorry about that. It is a bracket that receives some sort of tabbed bracket that would look similar to thin walled tubing smashed flat on the end. There is one on each side of the headboard and both are at the top...

I am in need of the DMWR for overhauling the t/r gearbox on the OH-58 A & C. Does anyone have a digitized version that I could obtain a copy of? This aircraft is not a Garlick TC so I can't use the Garlick version. I need the actual, military version. I beleive the pub number is 55-1615-298. Jim...

This is for the most experienced multi-fuel mechanics. I think that I have a rod starting to knock. It is most pronounced at around 800 to 900 RPMs when hot. The engine also developed a bounce in the tachometer at the same time the knock became noticeable. I now believe that I abused my engine...

Does anyone know what the Bendix fuel filter assembly part number and also the Bendix or Baldwin filter cartridge part number? My filter has the number on it but can't be read anymore. This is for the multi fuel engine of course. Thanks, Jim

O.K. I'm now offically Corn-Fused. In the two photos I have attached, there are the three fuel filters for the OEM canisters on my M35A2C. Obviously the shorter filter element will not fit in the housing shown in the second picture and the two other elements go on the left rear side of the...

I had my front end up on jack stands to finish my bearing / brake job and noticed that my steering box output shaft has about 3/16 up and down slop in it. This is the answer to the slightly wondering wheel while on the highway. Question is this. Has anyone ever found the bushings and sleeved...

I thought I had all my little duckies in a row but realized that I had forgotten the pliers for the brake return springs. :roll: Does anyone have a recommendation for these. The automotive ones seem a little short (about 13 or 14 inches long) for these tough springs. A brand name of pliers...

A while back I picked up my truck and the oil pressure was pegged out to the max side. When you turn power on the gauge is at Zero. When the engine is started, it eventually goes to about 60 psi or so and the pegs out. In my trouble shooting, I pulled the instrument panel down to check the...

I looked at the cross reference and I know that the dealers have them, but has someone recently purchased a wheel cylinder from a local auto parts store for the M35 series trucks? I have one that has a bad static leak so I purchased two new cylinders and four rebuild kits from one of our...

Has anyone been able to cross the heater blower motor to a civilian supplier or find a replacement unit that was new? This this is the "hot water heater as it is called that is mounted on the left fender used for cab heat. Thanks, Jim

I received my SF-97 today along with the re-assignment form, and the bill of sale from G.L. to me. This was done with them having the request from me for only one week and a total of two weeks including snail-mail time. Jim

There have been several threads on replacement seats. Can someone post a picture or two (or three) of the seats that come in the Hemmett? Please?? Thanks in advance, Jim