Search results

Odd, Those bunkers are pretty cool. Could you post more pictures? Outside too. Thanks. Steve

Bill, That makes 3 each! I will be selling one. Steve

Lav, All the batts were drained. I gave them to Mark. He probably would give them away if you asked. Gensets are in fine condition. Each indicated an oil change within one hour on the hobbs. Also, they both only have about 700 hours each. Good luck with your pickup. Steve

Kenny, Neither of us wants the bows. I'll get with Walter. I'll take a case of beer for em! Steve

Mark (deucecoupe) and I ran over to Jacksonville this morning to retreive my genset and trailer. Fairly uneventful. However, it took us about 30 minutes to get the lunette rotated (took us 25 minutes to get the cotter pin out). Yes, we knew what we were doing--I think. Anyway, flipped the...

I must admit, the "don't blame me" on both sides is discouraging. I'm glad they're gone. We all (as Americans) are in a deep pile right now. Seems like we'd try to work together to get things right instead of blaming the other side. We ALL may lose on this one if we're not careful. I'm...

I'm a little confused. Are some of you being charged up front for EUC items? I recently won an EUC item and my credit card was not charged. My EUC just went to Battle creek. I figured they'd charge it once I was cleared--which may be a while based on the GL situation currently.

I thought it was the Venturi effect?

I just bought a welder (millermatic 135), watched the videotape that came with it, read a little about safety, and had at it. Practice is good. It isn't that hard really.

BKUbu, thanks for the tip. I emailed for pics and more info.

I have one that I set up to run my entire house. I bought a couple more for spare parts. It fires right up and runs great! It is loud though. As I understand, they are very durable too. I'm counting on that.

I used a paint scraper with good results.

I bought something requiring an EUC. I knew you paid up front now. However, I couldn't figure out if my payment was made! I was so concerned, I chatted with GL and gave them ANOTHER credit card to cover the cost because they were telling me the payment wasn't paid?! Next day, they tell me it...

Guys, any idea what the weight of the M1031 with contact maintenace body installed and genset and compressor aboard?

Clean the posts real good with a wire wheel. Knock off as much rust as possible. I greased mine so they'd come out easier.

Man, took me a while to get through this thread. I've been "scared straight" off GL! I won't be bidding on EUC stuff. I won one EUC item back in the summer. My biggest problem was that noone knew what the situation was. I mean, I sent the paperwork literally DOZENS of times (electronically...

Are these vehicles (specifically an M1028) able to be flat towed? I need to haul one about 50 miles. Have a medium tow bar with 3/4 inch crow's feet. Would be towing with an F250 with 6 liter diesel. Thanks. Steve

I've always had good luck with a little heat to break the rust, then a pipe wrench. you've got plenty of surface area to grab holt of.

Ahhh, that makes sense. Thanks Jason.

I just won this M101 trailer on GSA. I picked it up this afternoon. It was obviously a genset trailer (ground strap data plate, holes in floor, fuel can holders, fire ext). Can anyone tell me what this bracket on the underside is for? Is this a spare carrier? Also, what's with the big sheet...