Search results

Quick Question- 16R20's Anyway have the absolute max height of the davit or snorkel or exhaust (I think the davit is highest) on this truck. The manuals aren't quite right and I'm designing a camper trailer to tow behind (must be shorter than the truck) and I don't have the truck in front of me...

Easily got the bottom four dog bones swapped out. Anyone have any recommendations for getting the top two off? I have the bed off the truck right now but I still can’t get a wrench or socket into those two nuts. Thanks! Also- I’m pressing dog bones for anyone interested. About $150 plus...

Good Evening, M923A2 concerted to an M925A2. 8.3 unmodified. Fuel turned up 3/4 turn (so not much). Almost no smoke whatsoever. Anyway- pulling stuff apart to clean and paint (and rebuild alternator), I found that the compressor side of the turbo has some pretty chewy looking blades- all...

Happy New Year to All, I'm going back in to diagnosing my CTIS, lighting, and tire pressure issues. My front left tire is not holding air much past overnight. As well, if I hit the highway button, I get a pressure check and then 5 lights and the front left boot fills with air. I can hit...

Hey everyone. Thanks for reading. I just went from 14R20s with perfect CTIS to 16R20 Michelin XZLs and the CTIS is not working. I know the front right tire is leaking on the hose between the valve stem and controller (flexible piece- to be replaced tomorrow). However- if I start up- the...

Good Morning, I've been reading a lot of forums so I wanted to bounce some ideas. My transfer case is really hard to shift. Button seems to be working (I can hear the click under the cab) but the truck is very very hard to shift and usually doesn't actually make it into gear unless I put the...

Happy Belated Fourth Everyone! Had a quick question- I'm about to pull all six tires, put 16.00R20s AT3A's in place of the mix-matched Michelin X's (4 rear) and Goodyear AT2A's (Front) (all 14.00R20). 1. Should I reuse the beadlock? 2. Any fitting/clearance issues? 3. I'm going to go buy a...

Hey Guys- Couple of questions but the first and main one: Truck has roughly 750 hours and 22k miles (M925A2). Occasionally the power steering can be really tough to turn the wheel, seems almost like it happens mostly when the engine is falling off a few RPM (like letting off the gas) and I'll...

Hey guys- I appreciate all of the help. So I got the truck over a year ago- long story short- all of the gauges were dead but the ABS and CTIS systems worked like a charm! I've put all new gauges in (all from a yard-should be good). I had a ground issue initially that I think I tackled but...