Search results

I thought I would pose a question to anybody that has installed these LED lights. My concern is when the running lights are on only three diodes are on, when the directional are on it is well lit as well as when you hit the brakes totally bright enough. To me it just doesn’t seem bright enough...

On the M900 series 5 ton that had the camouflage paint scheme what paint color was used on the Rims off the assembly line?

I have a 1983 M923A1 with an Allison automatic transmission 5 speed. When coming to a stop with this truck at a light or in traffic it always bangs when it downshifts. I am not manually downshifting this is doing it by itself. Is this the norm for this type of truck and transmission? I currently...

If it ever warms up around here I was thinking of changing and flushing the cooling system on my M923A1 NHC-250. So I thought I would ask if anybody has used this product, Peak Fleet Charge SCA Precharged. Your opinions Pro or Con as well as recommendations are appreciated.

I’m sure it’s a very short list of shops that work on the M900 series military trucks. In Massachusetts or in bordering states of Mass, what shops are available that can handle these Military trucks for repairs?

M923A1 Drivers side Wiper Motor, Air Operated and constantly leaking air on the right side of it. The right side has a small round mesh area; this is where the air is constantly leaking from. Is there a way to rebuild this motor and is there a kit to do so? Any help on this would be greatly...

Attn: WillWagner Here are the pictures I was talking about the inlet and outlet. Sorry I couldn't send them in the other response to you at the attachment didn't show up in the toolbar.

DA33110X, Haldex I was hoping to get a little advice as well as some helpful feedback on the DA33110X, Haldex air dryer! To buy a new one out right is a bit pricey at $400 plus. There are the remanufactured ones by Haldex that are about $270 +-. So in your experience what are the pros and cons...

I realize that this request has probably been beaten to death.... BUT I have looked through a bunch of the posts in reference to this and their looks like several options for connecting these hoses. So if I can ask, I'm looking for the best location and for the best results for the tie-in of...

Fan Clutch Thermostat CAS190 CA200046....Is there a kit available to rebuild this fan clutch thermostat, if so how would you get off the aluminum part at the end without destroying it? Any information in the right direction would be great

Is there any company out there that sells this product other than Oshkosh equipment ?? their cost seems a little pricey !! Inner Wheel Well Splash Guard, Drivers side M923A1

I realize this is not the norm, but I bought the truck this way, So go easy. I have three Michelin 14x20 and three Goodyear 14x20 I'm definitely going to change over to the Michelin. But my question is what is the ramifications of running two different type tires with two different weights and...

I know, I know.... this is probably already posted but I couldn't find it,There are so many out there. I'm looking for the exact TM manual that shows the entire breakdown of the front axle bearings ,seals, the rubber knuckle boot ETC.. As well the reassembling procedure of the front axle with...

I added a secondary directional light and tied it into the wire #22-460-461 which is the stop/turn wire. Unfortunately when I step on the brake that turn signal comes on, other than that the light works fine when using directional. I should’ve went with my gut feeling and not spliced into...

On the M 900 series typically on the Marine 5 tons they had what they called paperclip's located onboth sides of the front bumper I realize I could get 1"rd stock. I also realize I could heat the 1"rd stock with acetylene torch and bend it, but I washoping somebody out there might know if...

Ithought I would throw this question out, aswell looking for pros or cons on this product. Has anybody used this AIRCLEANER CUSTOM KIT from Those Military Guys website?

I thought I would throw this question in the hope that somebody might point in the right direction. I have a 1983 M923A1 and the right front tire is slightly tilted out at the top. I looked through the manual and Ijust couldn’t put my finger on it. I still don’t know why its like that. Any...

I’m hoping somebody out there can give me and easy way of removing and replacing the shock underneath the front drivers seat of my M923A1. I just want to work Smarter Not Harder!! Remember now, it’s just a question!!

Before you guys go off onthe deep end on this question, this is just a question. I have installed a newfuse block to accept accessories which can run on 24 V. I have a M923 with (4)separate batteries wired in succession. I have a 4 ga. Wire coming off fuseblock and I want to put it on the 24 V...

I was hoping that someone could point me in the rightdirection on this! I want to install a LED backup lights on my M923 is there awire in the rear that I can tie into so that it will engage the backup lightsas well as power them?