Search results

Hello from NW Fort Worth.:beer:

I took "Haywood" out to make some $$ pulling folks out of the mud at TMS. Sorry I could not get some "action" shots because I was so muddy. But, some friends of mine had their kids out there and he took a couple. I could not get to people fast enough to pull them out.

Who was at the 24hrs. at Daytona race? I saw a Deuce in the background when Terry Labonte ran out of fuel and was in the inner camping area trying to get back to the pits. If this is a re-post, sorry. My wife was confused because I jumped up, she thought it was a big wreck. I told her, "**** no...

It's leaking oil around the base. It's more of a seap than a leak, not enough to drip on the ground but noticeable. What could be the cause?

Ok.

This is a fellow SS member that allowed me to use his deuce for a car show/fund raiser at my daughter's school. It was canceled at the last minute due to the swine flu scare. But it was worth posting a "thank you" for trusting me with your truck.

Fifth gear is real loud. Shifting is butter smooth. All other gears are quiet but fifth has a loud wine. Fluid level is correct/recent change but I did not have the chance to hear it before fluid change. I used 80-90w GL-1. It's not jumping out of gear, tranfer case fluid is good. Ideas?

Great vid Ken. I noticed that you cut the part out where you got stuck in the mud at Mudfest.:-P

Need to know what has been used as a substitute to the wrench that is used to adjust the compressor belt? It shows a big spanner wrench.

Thank you..

When I replaced mine I found that it was very important to start the line at the IP first and get it just barely tighter than than what you can tighten with your fingers and then start the line threads at the injector. Of course this is with metal lines. I made mistakes(I can do this with no...

RE: Re: How much is your Deuce USAA $20 for full coverage. 100/50/100 Chuck XD Fan

Re: RE: Turn Signal Flaser Light? Roger that.. Chuck XD Fan

The flasher switch/relay in the LF fender well. It might be a loose ground also. Call Mark at RAPCO in Bowie. Great folks/service to help you out.

How good does it work and how does it look on the truck? This is solid gold for me on my next truck(M35). Great pics, let's see the end result.

Yea, I have seen this before. If you look close the switches are on the other side of the dash. I like this set up. I looks cleaner and easier to work on the IP without all the stuff in the way. "Stuff" in a technical term. I can not give you details on performance as I have not had an M35 with...

I drove mine as a daily driver through a VERY affluent area every day and got the "thumb's up" from the folks in the high class automobiles every day. "DON'T MAKE SCRATCH MY ANVILE A$$HAT" . Shinny car, Shinny car, Shinny car M35. Make a hole, comming through! Chuck XD Fan

I ran almost 90% WMO. I was lucky that my primary FF was as large as the final two. I filtered my WMO through a 3 micron fiter before going into the truck. What I found to be funny was that my FDC was bypassed but when I ran high ammounts of WMO and then went back to deisel the truck would have...

Mine sometimes would sound like I left half the wrenches under the hood and there were times the times the thing was as quiet as can be be. Nothing but "C" turbo. Chuck XD Fan

May need to put some gas in a Camel Bak. That is pretty far between stations out there. Chuck XD Fan