Search results

Does anyone know about the October 14th collector show at Renningers? I just came across this on CL.

In my head I was planning on getting there Friday and then my Son just told me it starts Thursday. Are we going to miss out on anything arriving Friday or do I need to plan to get there Thursday.

I will throw my hat in the ring.

Does anyone attending the Fall show have hands on experience turning up the timing on the 8.3 cummins? If so My truck will request a spot in the motor pool.

I will be good for a couple of shifts if it comes together. What is the deal with tools for the work? I bring my own for my needs but I have "misplaced" a couple during team events, I am sure not on purpose but things do happen.

My CAT Dozer draws 60 amps on a long crank with 2/0 cables I cannot get a reading on the 8.3 as it fires right up as soon as the starter engages. Apparently the high/low setting on meter is not working. If you are drawing enough to worry about burning out a switch you need to look at your...

I have taken mine out plenty on my own but there is normally not a trail ride during the show. During the GA. Rally they do a trail ride for those who want to participate. The shows are close enough to the forest a trail ride could be something but it might just be one or two people. We could...

I carry my 3/8" cordless impact which will break most everything loose except lug nuts, For the lugs I carry a torque multiplier which will twist off a lug stud with ease. I use it to break them loose and then the impact for speed.

It is a flush mount switch but I cut a hole out of the battery box and just put the front housing through to minimize visibility. I will tape it off and paint it to match the box and hopefully it will almost disappear. Also with it being through the cut hole it allows outside access to the keyed...

I installed the first step for my 12 vdc power station. I placed a keyed battery selector where I can select group 1 or group 2 or lock the batteries out. I can now turn the batteries off for over night stays and use group 1 or 2 for power in the bed to power fans and lights then in the AM I can...

Installed a keyed battery selector/cut-off. I am running four batteries but now I can isolate group 1 or group 2 or lock them in the off position.

FLMVPA.org

I will take blame for that as I did not clearly label that all 3 are different events.

Florida Forest Festival in... Perry, FL. Just a one day event but there will be other MV there.

You are more than welcome to come see the rally even if you did not currently have a MV. Look me up at the FFC-MVPA Fall event if you can make it.

They best way to get notifications on upcoming events is to join your local MVPA. We have an event coming up October 5-8 at the Market of Marion and the GA rally October 18-22 and a winter show in February. If you find an event on here just subscribe and you will get notifications when there is...

M931a2

Before I start to build this unit I wanted to check and see if anyone else had already done it or had any better ideas. After my weekend trip sleeping in the bed I want to put a 12vdc station in the bed of the truck with a disconnect plug for removal. I will run 24vdc to the rear and have a...

I Agree

Went on a camping trip in Ocala National Forest. Lots of trail riding and wildlife, Could not get the camera out quick enough to get the bears but they were healthy