Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
On my way to work this morning about 5 miles into the trip i started smelling burn coolent. I looked down and the floor of my deuce was filling up with water. I pull over in a friends yard and get out and look under the hood and the rear head of my multifuel is sparying water right on to the...
I installed a 12v winch on my deuce, it has a seperate 12v battery powering it right now. My question is can I run a power wire off one of the trucks 12v batterys and run it through a battery isolater the to the postive on the winch battery. then run a ground wire from the - of each batterys...
I started installing a 12000 lb electric winch on my deuce today. I gotta add a few more braces to make the mount stronger and wire it up but I think it will be ok. it is 12V so im gonna run two stand alone batts just for it and some lights. I will have to figure out the wiring but I dont think...
my front tires keep cupping out real bad. I have to change one of them about every three months. I checked the toe in and it seems fine. I drive around 1000 miles a month. do the ndts just not hold up that good to the high way drivnin that well?
my deuce will go about 10 miles then it will start buckin like it was runnin out of fuel, it will shut down it a few secs. The fuel return line are all empty. i though it might have been the filters where clogged up. I put new ones in today and it did the same thing. i pulled over and all the...
There is a beautiful M932 5 ton tractor sittin in Jakin GA. It is at a logging business the people there said some one bought a wood chipper from them and dropped the truck off and is gonna pick it up in a few days. Does any one here know of who bought it?
check out this cool lil tool i made to hold the inside nut when turning up the fuel on the deuce. I had a old multi-wrench laying around that i got with a set of air tools a cut it in a few thought out spots and it fit perfect.
I believe I have traced a fuel leak down to the 12 point bolt on the side of the hydro head of the ip. I didnt wanna just pull it out and mess something up. so what can yall tell me about it?
would front hubs that unlock on a deuce that has a sprag transfer case a waste of money. I just dont see them doing any good. if you unlock the tires from the axle the transfer case will think the back tires are slipping and ingage the front axle and it will be spinning any ways thus kinda...
I have searched for hours to try and figure out what is wrong but no luck. My front axel does not pull in forward gears, it will work most of the time in reverse. It is a sprag type transfer case and i have adjusted the linkage like the manual says. i can pic up one front tire with it in a...
I just changed all three fuel filters on my m35a2 now it dont seem to have half the power that it did and no smoke at all. it was smokin pretty good. Does any one no the reason for this?
I have turn signal light housing that i have never seen on a m35a2 before. Can some one tell me what the are off of and way they ended up on this truck. This is a pic of one off the truck.
My m35a2 usually in the mornings I can tell it has lots more power and smokes a lot other times not so much. i have been runnin 100% wmo in it. can any one tell me why the truck would have have all that power and smoke like that today and then tomorrow its normal for what it is?