Search results

I have a hose that need replacing. If you follow the steel line from the tank and it crosses over under the radiator then connects to a rubber hose about 16 in long. I need this rubber hose. From the steel line to the pump and has two female fittings one larger than the other. Any vendors come...

Mutt either one will do. Thanks.

Some DOT brake hose info..S5.2.1 Each hydraulic brake hose, except hose sold as part of a motor vehicle, shall have at least two clearly identifiable stripes of at least one-sixteenth of an inch in width, placed on opposite sides of the brake hose parallel to its longitudinal axis. One...

I dunno Sam, all of mine had GY-3/16-5013-SAE J1401 ---------P-9 (in white) or something similar then DD/MM/YR on them, even the 1979 hose on the front.None of mine have MIL on them I believe.

Stampy.After a few weeks of measuring and trying different brackets and positions, you really have to be anal to do this. Next I had to find a manufacturer to custom make the correct gas lifts, pressure and lengths. Took a bit of math but they work fantastic. The company is in Canada LST...

That's a good question Spyder, I will check around.

Sam, there is a date marked on brake hoses, mine all had month/day/year onthem, clean them off real good and you will find it. I am pretty sure that is the date of roll of hose manufacture not when they put the ends on. Got all mine changed today, including that front intermediate rubber...

Cleaned and painted chassis. Installed all new shoes,wheel cylinders, seals, one front boot and inner seal, and brake hoses on all wheels, quite a job. Have to bleed the brakes still. Installed bows and new camo cover. Installed axle vent hoses with clear heavy ribbed hose. Installed gas hood...

I will use them. The one I just removed was dated 3/10/79. That one lasted a while. The two new ones on the rear are 9/10/02.

Thanks for the reply. I just bought them from a reputable vendor, they look and feel soft and new and were sealed in plastic bags.

Am replacing front hoses and noticed the dates on the new hoses read 8/84 and the ones on the truck read 11/97. Would you use the new,1984 hoses?. I have some bad nicks in the hoses on the truck now.

I have just replaced all wheel cylinders,seals,shoes and hoses. I have installed the rear hoses and was ready to install the front when I saw a mfg date of 8/84 stamped on the hoses. The ones on the truck now are stamped 11/97. One looks fine and the drivers side has a deep rub on it. What would...

Good info here, thanks.

Interesting machine you have there. More pictures please.

Anyone know where I can get a AS-1729/VRC Antenna. Thanks.

Which motorcycle jack did you use?.

Makes sense, I never thought about this way.

Take a look here M35A2 Dual Circuit Brake System Upgrade

Heath, I like the way you think. An emergency emergency brake.

How's that gun truck coming? I need a m66 mount for a Deuce. I will measure for new pins and fit some bushings probably next week.