Search results

M109 box H R D Shoot me a price the box is off the truck and sitting on my trailer. Just west of kansas city Been out of town friday night a saturday.

I have one it has 3 windows down each side 1 in the back a big door and small door and is availably.

Back many years ago I worked in the oilfields of Oklahoma Operated a Dozer when the weather got bad we would pull the rig trucks out with winches mounted on the back of the dozer. The dozer had a 1 inch cable but the trucks were weighing in at 80.000 pounds or more, snapping a cable wasn't un...

I have looked at all the posts on heaters but haven't found the wiring diagram. Does any one have a copy of it? My heater that came with the truck was missing the instructions page. Thanks, Greg

Excellent story This would make a GREAT Action adventure Movie :D

When I replaced the seal on mine I went to the Hardware store and bought a small putty Knife ground down one side to fit and used that. Also a good sharp pocket knife is handy.

Ok That works for me. Thanks

I was sure at one time there was a PS article on changing the Axle boot. I cant seem to find it now. Does any one still have it? Thanks

Dont have any good shots of the truck yet, But here is one of my Jeep

I remember as a teenager digging through a salvage yard a sign saying that; A MILLION VEHICLES RUN ON USED PARTS.

RDD I said the same thing when I started this project, "This is going to take a long time" I started with complete truck with a junk motor luckily it came with a spare. The spare had the # 1 Injector missing but had yellow markings on the front motor mount that said GOOD KEEP I...

Finally got all things hooked up Pored in the oil bleed the fuel lines checked for leaks fixed a Leakey petcock on one of the fuel filters turn on the master switch hit the starter button and hoped for the best. Cranked for 15 seconds waited the oil pressure build then stopped for 10 seconds Hit...

A friend and I installed the Engine in the truck tonight glad that it is done. Now I will hook up all the lines and wires and hopefully have it running soon.

Found 1 at Memphis Equipment Already been shipped Thanks for the replies

Hi All I will install my Rebuilt LDT-465 This week But I am in need of a Dipstick the original took a big hit when the # 2 rod vented the block It does not fit in the new engine vary well. I tried Saturn Surplus but they are out. Does any one have a extra they would be willing to sale? Thanks

The Van Body Is 12ft long I will measure with tomorrow Thats not a bad Idea.

I have almost run out of room I can park everything inside and out of the weather. If I cant park it inside I don't know if I want it. Unless I can get the wife's dad to move his RV.

Well I have a Shop Van I cant tell you how good or bad it is as the truck is not running YET. I am getting real close Couple months. I don't know I might trade the van body for a good complete cargo bed in the future.

Did some testing and I think all is right with my posts

Went down to my shop after work today I have pulled down the junk motor all except the clutch I will do that Sunday. My replacement engine is in great shape except for the #1 cylinder. It had set for a while with the injector out and got water in it needless to say it is rusted up but not to the...