Search results

Anyone have a chart or something with the part numbers for gaskets and seals that can be had at napa or similar places? Im leaking oil from either my input or output shaft as it is slinging up through the inspection cover by the transfer case shifter lever

What size are the air tanks on the duece in gallons? What does the engine driven compressor put out for cfm and psi?

so i have the stock rims and i want to keep those. I know this has been covered alot. I cant go much bigger than 10r20 maybe 11r20 because of the bob job. So what tires are available that have good tread traction and are above like 75% or better tread left. i have sourced some commercial...

So i am going to be putting a mile marker hydraulic winch on the duece, and i am considering two options for the power source, well three i guess. The first is a hydraulic clutch pump like this High Pressure Hydraulic Clutch Pump — 2.32Cu In. | Pumps | Northern Tool + Equipment The second...

What would be involved since doesn't the multi have a weird pattern?

so i have one old 105 trailer left and i am considering making it a powered dump bed. So in anticipation and research i contacted pierce sales for some info on their 2 ton universal kits which comes with everything you would need to make it work. I then asked them about a 24v setup. They said...

How does the rear drive axle setup work? Any one have some pictures? oops i meant 6x6

so i cant remember the name but it was a super nice m715 that had a unique paint job of white on everything and then had od green on the center part of the hood and green jeep letters and thats it, really cool looking any one remember?

What do the 1/2 ton weapons carriers take for the lube in the tranny transmission pto axles etc etc? Just bronze metal safe 80w90? Can i run 5w30 in the engine? or? Anyone have a TM or chart with cross reference?

So guys what do you use to stop the rust by either removing or converting it? I have used SEM self etching primer? What is the best stuff that can be used as like a primer? I want to take the truck to a paint shop after i clean it up. Is there things like this that offer the olive drab colors...

So guys what do you use to stop the rust by either removing or converting it? I have used SEM self etching primer? What is the best stuff that can be used as like a primer? I want to take the truck to a paint shop after i clean it up. Is there things like this that offer the olive drab colors...

So i know this may be hard without pics yet but a friend of mine has what looks to be an old 1/2 ton weapons carrier with warn lockout hubs dual rear wheels and a pto driven hydraulic dump bed that has a delivery date of 1941? The rear axle is centered as well. Where the heck would you even...

Do we know anyone in Washington that can give a deal on some sandblasting/ painting? Or do we know someone that has a blaster? I have a huge compressor. The other option is renting the blaster but the media is super expensive unless you buy direct from the four or five company's around and most...

can i bolt up a 6.2 in place of where a big block 454 was? its a sm465 tranny?

can i bolt up a 6.2 in place of where a big block 454 was? its a sm465 tranny?

anyone know about these? Were they ever offered for auction? Anyone have some good pictures etc etc?

What is the sae number?

What is the sae number?

Has anyone ever put a hydraulic pto in place of the stock duece winch pto with little effort? Also if i had the hubs on all of the rear hubs and unlocked them to free spin, could i put a rear pto winch off the axle since it would be spinning and just not going any where? Then i would use the...

so i am looking for some info on the trucks big and small that came with front and rear winches. What are these trucks? http://www.easternsurplus.net/318.html I want to find out more about the above trucks with some in action pics and description of what the heck they did.