Search results

About three years of off and on work. But it was fun. Here before and after. Now I just need to get off my duff and get on the m43

This is the stock winch setup. This is a Canadian truck, but the winch is the same.

Your very captive audience would die for a short video with sound when you get it up and running!:-D

What is the micron rating of the stock oil filter?

Lane or Kenny, opportunity knocks!!!!:-D

The top round thing is the filter and the bottom is the pump.

Cork is in place and gear oil is "one knuckle below filler hole". Your method of adjustment is in an older tm. I did the adjustment with outer wheel off, and tried to make sure inner nut didn't turn when the outer was adjusted. Will try again, this way.

When I got my truck a year ago, the right rearmost axle was was leaking. I put in new seals and repacked the bearings. I adjusted the bearings according to the TM, torque inner nut to 50 lbs and back off 1/16 to 1/4 turn. Torque outer 100 to 200ftlbs. After a test drive the hub was hot to the...

I looked at the data plate on what I thought was my m105 trailer. It was marked xm105-e3. It was made by Checker in 1953. Is there a difference between them? Or is this just a earlier version of the m105?

Mine are just 2 x 10's stuck in the steak pockets, certainly not original.

Hey two in Michigan! :lol:

When funds becomes available: 1. Oil filter adapters 2. Find and install better front fenders( mine are too rusted to salvage) 3. Repair hole in tool box bottom( have off the truck and here, winter project) 4. Change to new style brake light switch( easier now that tool box is off) 5. Paint...

That trailer would be great to park on the property line next to that neighbor who complains about the ugly trucks.

The plug wire checked ok with ohm meter. I had the unit in a vise, with the plug wire minus plug about an 1/8 off the vise. I supplied power directly to the positive pin and negative to the case. I assumed that the case is grounded. When it was in the truck, it would not spark with plug grounded...

My truck's manifold heater wasn't working so I chased it down to no spark. I bench tested the coil and could only hear some internal buzzing, but no spark. Where can I get another coil?

I go up to the Oscoda area on a regular basis. I could always meet you half way some where , and then get it down to the Detroit metro area.

With all that space between the rack and the cab, how about a crane. Think of all the things you now do with the truck!

Jason a couple of years ago somebody on the "other m37 forum" made up a bunch for that truck. I would think there the same. I bought six at the time thinking someday I might need them. If you ask over there maybe somebody's (really anybody) memory is better than mine, could tell you who and...

I've been away from the internet for the last few days and just now saw the final price. WOW. I now know why I can't even draw a single number on a lotto ticket. I used up all my luck when I bought my dump and trailer at auction for $1100. It was missing the radiator and the starter need to be...

WOW!! is right and there is 11 hrs left.....