Search results

The difference is 150.

Every 15 minutes?

I'm down for no mud. It saves a lot of water!

If you have 4" clearance with 14.00R20's, you're good to go. (be sure to post some pics of your machine!)

I'd start by checking the gauge.

Mine sets them all to 70. Data plate says 80 and 50r.

I'm not afraid of sharks, especially when I'm hiking.

You have the NHC250 (non turbo). It's size and design are less efficient. If you look at the TM (TM 9-2320-272-10, page 1-22) , you'll see that the M939 and M939A1 (which you have) are listed at 3 to 4 mpg. The M939A2, with it's 8.3 Liter turbo engine, is listed at 5.5 to 6 mpg. These are...

The placard on the dash shows 26mph max in low range, and 63mph max in high. Perhaps it's locked in low. If you can go about 15 in 1st gear, you're in high range. If it's about 7, then you're locked in low.

8 to 10mpg is about average. If you can keep it it 50, you'll probably see 11 or 12 mpg. Think of it this way: The truck weighs 32,000 lbs (at GVWR) and gets 9 mpg. (288,000 lb/miles per gallon of fuel) A Prius weighs about 3,900 (at GVWR) and gets 55 mpg. (214,500 lb/miles per gallon of...

Anyone up for tomorrow? (12/29 Sunday)

Yes.

Here's the video I took. Pardon the music... http://youtu.be/FgdRDVLn5kE

The video makes it look so easy. There's a lot of skill required driving up such an obstacle. Mad skillz, yo! It was easier a few weeks ago. https://www.youtube.com/watch?v=zGMZZ2dQam4

Left hand drive?

I'll be there by 9am or so. (1)

Saturday looks like the day. I need to turn mine up before then. It's a dog. I'm going to give two turns to that screw that's accessible from the top of the pump (6cta also)

Cool lights. Clean install, too. Does your truck have the 6cta? Or the nhc250 engine? I hope you're bringing it out on Saturday!

At the back side of the air intake. You need to get under there and look...

Just an fyi that left side threads are left hand.