Search results

cummins = lots os $$$$$$$$$$ most expensive route to go 15k avarage. sbc is best imo got a few of both.......... i prefer sbc

thanks good feature, bob

m715 and its made to widen the track width of the m715. the wheels are reverseable.

leo p[orter in dallas-ft.worth area has most of what you need. i have a set of stock tail lights but ii highly recomend hummer-m35 ft.& rear lights for better visability. bob 423 384 8938

I need a set of shock and a hub-drum assembly for a marine corp. Drop axle, 8 lug. M101a3. Bob 423 384 8938 tn.

Water pump pulley I will remove and reinstall your pulley then return ship to you for $45.00. been doing them for 15 yrs. i do it correctly with correct tools. bob

I,LL look my m715 over tomarrow and post exactly where to hook the hot and cold ( return lines up for ya ) i,d suggest installing a cut off valve for the hot water out of the engine for cooler summer use. seems like it was on the passenger side of the head near the rear for hot out and the...

THE 6.2 & 6.5,S CRACK IN THE MAIN BEARING WEB OF the block, above the crank....

early dodge hubs will work.

tom, your the man..........

RE: Re: New member questions about a M715 i,ve got some pic,s of a m715 with a j-cab swap if you email me i,ll be glad to email em to ya. bob bcowanwheels@aol.com

cummins swap i,am just finnishing up a cummins 4 bt-t98 ( stock ) trans. swap now. it fits really good and isnt a hard swap . my customer wanted to keep his m715 as stock as possible with exception of tires & wheels , t-case, r&p gears and engine. turnning out really nice. i,ve drove lee ,s...

A CIVY 230 Engine is a higher compression engine than the military 230. swaping the civy. 2 bbl carb & intake is common with the mv croud but you have to re-jet the carb and lean it down a little to get the proper fuel-air ratio correct. IMO the stock 1 bbl carb is best suited for the m715...

remember when you buy rims make sure you buy ball and seat rims where the lug nut go. the new style semi rims are hub piloted and just have 1 nut holding on 2 rims and there not interchangeable. also the new style is metric. bob

I have alot of m715 & m725 parts for sale or possibly trade. Also i make custom wheels for these vehicles ( 14+ years exsprience ) along with complete engine adapter kits and split master cylinder kits , call or email me with you needs. bob in tn. ph.no. 1 423 384 8938 or email...

i build custom wheels for the M37 . I,ve been building them for over 14 years. i reuse the stock wheel centers in new tubeless rims. i do them in 16" and 16.5 diameters up to 12" wide. contact me if you,all need a set or more info. bob cowan, kingsport, tn. ph no. 1 423 384 8938 or email me...

I BUILD CUSTOM WHEELS TOO ! BOB IN TENNESSEE 1 423 384 8938 CELL

I guess nobody really had the part numbers afterall huh .i wish i could strikes again

6bt cummins mated to a 305A TRANS PART NUMBERS NEEDED HELLO I,AM GOING TO INSTALL A 6BT CUMMINS IN AN M35A2 WITH THE STOCK 3053A TRANS. i have the sae # 3 bellhousing but i need the part numbers for the flywheel and clutch & pressure plate setup. can someone help me ? all info would be a...

6bt cummins mated to a 305A TRANS PART NUMBERS NEEDED HELLO I,AM GOING TO INSTALL A 6BT CUMMINS IN AN M35A2 WITH THE STOCK 3053A TRANS. i have te sae#3 bellhousing but i need the part numbers for the flyheel and clutch & pressure plate setup. can someone help me ? all info would be a greatly...