Search results

If I wanted a 5 ton and I wanted a 939 series, I'd want an A2 for the engine. I'd gladly disable the CTIS to get the good engine.

I think either E22 or Maddawg are right. It has to be the 757 or the MANN's. What else did we have that was 8x8 at the time? I doubt he's thinking of those ginormous nuke hauler things form the Fifties. I don't think they were ever deployed outside of Western Europe.

The Army refers to it as a "liner". TM 9-2320-209-3-2. Section 14. Flap (liner) goes in between the tire and tube so the tube doesn't chafe against the tire and leak. Also: http://www.steelsoldiers.com/showthread.php?114647-9-00-x-20-Tire-Flaps-for-NDCC-NDTT-M35a2-Tires...

I'd call that a dynamic balance issue. I'd either swap 2 different tires to the front or have your fronts balanced.

Airpack first, then start at the wheel cylinder furthest away and work your way towards the airpack (right rear, left rear, right middle, left middle, right front, left front). Build a bleeder-it's so fast it's absurd. You'll never do it the old way again, I promise.

Ya'll that are having a hard time finding what you need, post up here: http://www.steelsoldiers.com/showthread.php?58151-trouble-searching I'll (or someone) will find it and tell you how they found it.

I want to add that Andy is a friend of mine and I'll vouch for his "good citizenship".

I can't remember where I found this, but one of the manuals has the load rating for the pintle itself-the NSN for the deuce pintle says it's (the pintle, not the truck itself) is rated for something astonishing like 15 or 20 tons. I'll look tonight and see if I can find it.

Go put some soapy water in a squirt bottle and let air pressure build up. Shut the engine off, make sure the truck is chocked and in gear, parking brake applied and crawl under it with a flashlight, spray the soapy solution on all the air lines, the airpack, etc. and find the leak.

Absolutely. This is exactly what I'd do. Do keep in mind that with air brakes, your trailer only has brakes with your deuce, but with electric brakes, it has brakes with your Ram 2500 and your deuce (once you've added a trailer brake controller).

Also, couldn't fit these 2 in the last post:

I am in the same boat-no 5 tons, but I want a serious flatbed trailer to haul stuff. The only m-series trailer I've seen is MTO-20 EET that's linked below and it weighs more empty than the deuce is rated to tow. Looking at Holden's site, they do make a smaller flatbed trailer, the MTO-16...

I am not so sure about that. The "fuse" in the stock steering system is the driver's arm and upper body strength. At a certain point, no matter how big the driver is, s/he's not going to be able to move the steering wheel. Think about a 14.50x20 tire that's stuck in a deep rut. Now...

I've never seen an installed REB kit.

Short answer: Spin on oil filters: Faster to change, almost instant oil pressure (which is probably of limited benefit, since all these trucks already have 95% of their dry starts under their belts by the time we get them). Spin on primary filter: Lot easier and faster to change. I can't...

I'm very sorry to hear this. 38 is just way too young and it's doubly because Devin seemed like such a decent person. Existence can be very cruel.

Dude, that rocks.

It's funny this is brought up. When I moved to where I live now (in 2005), the local NG unit had a parking lot full of Deuces, 3 of which had mounted M66's. Now it's all MTV's. And every time I drive past, I cry. I mean, it's so sad. The Huey's are gone, the F-14's are gone and now the...

Isn't what we're describing a REB kit by Memphis?

The old deuce forum is for the GMC M135/211 types. It won't be in there. I just looked in the Deuce TM section and we mostly have the multifuel TM's. You'll find that everything's the same, except the engine, radiator, etc. You'll need to find out what TM's (TM #) are relevant to your M35...